Published byTheRealHypnotiX on 2006-08-07 Category: Bios | Page Views: 13,722
In this tutorial I will be telling you how to flash the HyperX via Network.
I tried a CD with it and it didnt work. Anyway, this worked for me just fine!
To get started go into the downloads section and download the X2 5035 BIOS.
Next, you need to extract it from the rar file. Now we are ready, turn on your xbox(with chip installed)and it will give you a list of options(Flash BIOS from network, Flash bios from cd, etc), choose flash with network.
Now go to you computer hooked up to the same network as your xbox.
Type in the IP your xbox gives you, mine was 192.168.0.177 or sumthing like that.
Once your connected,Just go open up the BIOS on the web page, then click update BIOS.
Now it will prompt you not to touch your xbox untill it is done or turn it off when the chip LED turns amber.
Now your all done, it should load up the original M$ dash. Pop in your AID disc and install a hacked dash and Voila