Divineo.com/Divineo.co.uk sent us a compatibility table for the new Xodus SP.Adapter (universal NoSolder adapter for Xbox v1.0-v1.6b). Note that this just says if the SP-adapter in combination with a modchip is compatible with an Xbox version. Before buying also make sure the bios preflashed on the modchip is compatible with your Xbox version!

Modchip: Xodus Xenium ICE:
- Confirmed/tested v1.0-1.6(b): yes

Modchip: Xodus Xenium Blue:
- Confirmed/tested v1.0-1.5: yes
- Confirmed/tested v1.6(b): yes, requires user to short black and blue wire of D0 wire loom chip can not be disabled via software

Modchip: Xecuter2.6:
- Confirmed/tested v1.0-1.6(b): yes

Modchip: Xecuter3:
- Confirmed/tested v1.0-1.5: yes
- Confirmed/tested v1.6(b): yes, some physical restrictions due to header conflict. Philips dvdrom may interfere.

Modchip: Xecuter3CE:
- Confirmed/tested v1.0-1.5: yes
- Confirmed/tested v1.6(b): yes, physical restrictions some slight force required to seat chip full down. Once seated works 100%.

Modchip: Eb2k X-Chip:
- Confirmed/tested v1.0-1.5: yes
- Confirmed/tested v1.6(b): To be advised. Requires additional LPC extension cable, Planned but not yet released. TBA

Modchip: Eb2k X-Lite:
- Confirmed/tested v1.0-1.6(b): Not tested (should work)

Modchip: SmartXX v1/v2:
- Confirmed/tested v1.0-1.6(b): yes, requires one wire mod by resellerprior to shipping. D0 needs to be wired to pin 4 of LPC (see install manual)

Modchip: SmartXX LT OPX:
- Confirmed/tested v1.0-1.6(b): yes

Modchip: DuoX:
- Confirmed/tested v1.0-1.5: yes, requires female header to be installed by reseller prior to sale.
- Confirmed/tested v1.6(b): yes, requires optional wired female header to be installed by reseller prior to sale.

Modchip: Aladdin:
- Confirmed/tested v1.0-1.5: yes, requires female header to be installed by reseller prior to sale.
- Confirmed/tested v1.6(b): yes, requires optional wired female header to be installed by reseller prior to sale.

Modchip: Adaddin XT:
- Confirmed/tested v1.0-1.6(b): yes, requires one wire mod by reseller prior to shipping. D0 needs to be wired to pin 4 of LPC (see install manual).