Nope. Still no luck with unleash either. Although i am gettin ready to through this xbox out the window.
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Fri Mar 24, 2006 11:47 pm Post subject:
It didnt surprise me that unleashx didnt work because xbmc didnt. That means that the ICS PHY chip is gone, the xbox is still good, you just cant network, ftp to it or anything, Do you want this repaired? I can bring another mod over and see if he is able to replace the chip. _________________
tenzo Xbox-HQ Enthusiast
Joined: Mar 23, 2006 Posts: 24
Posted: Fri Mar 24, 2006 11:52 pm Post subject:
Yes i would like this fixed, but what do you mean by bringing another mod over?
Joined: Mar 04, 2006 Posts: 30 Location: clifton heights pa
Posted: Sat Mar 25, 2006 12:16 am Post subject: re connection
if you are on windows xp , go to start then run, type in cmd and hit enter. type in ipconfig and hit enter , write down your ip address and subnet addresses, then load a ftp program such as craxtion or flash fxp, go into your xbox and in the network settings manually set the ip and subnet address, if your computer has a ip address like 192.168.0 then set the xbox at 192.168.1 and make the subnet address the same, then in craxtion or flash fxp just enter the xbox ip information, hope this helps later jimd1122
Posted: Sat Mar 25, 2006 12:27 am Post subject: Re: re connection
jimd1122 wrote:
if you are on windows xp , go to start then run, type in cmd and hit enter. type in ipconfig and hit enter , write down your ip address and subnet addresses, then load a ftp program such as craxtion or flash fxp, go into your xbox and in the network settings manually set the ip and subnet address, if your computer has a ip address like 192.168.0 then set the xbox at 192.168.1 and make the subnet address the same, then in craxtion or flash fxp just enter the xbox ip information, hope this helps later jimd1122
Thanks for the help, but i know how to ftp already. If you've been reading the posts, you'd know that my problem isn't not knowing how to ftp but something totally different.
thanx anyways.
Posted: Sat Mar 25, 2006 12:27 am Post subject: Re: re connection
jimd1122 wrote:
if you are on windows xp , go to start then run, type in cmd and hit enter. type in ipconfig and hit enter , write down your ip address and subnet addresses, then load a ftp program such as craxtion or flash fxp, go into your xbox and in the network settings manually set the ip and subnet address, if your computer has a ip address like 192.168.0 then set the xbox at 192.168.1 and make the subnet address the same, then in craxtion or flash fxp just enter the xbox ip information, hope this helps later jimd1122
Thanks for the help, but i know how to ftp already. If you've been reading the posts, you'd know that my problem isn't not knowing how to ftp but something totally different.
thanx anyways.
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Sat Mar 25, 2006 12:53 am Post subject:
have you tried testing a connection to your xbox from the pc using the windows command prompt (DOS)??
Sorry ive come in so late on this topic tooo.. Hope im reading things right.
I would do this to test your xbox is working and receiving packets from your pc.
1. Click Start Menu
2. Choose Run
3. type 'cmd' and press enter (type 'command' on older systems)
4. now type 'ping 192.168.0.1' or whatever your xbox ip address is
5. Packets of data will no be sent from your pc and to your xbox ip address.. If it is working correctly you should get a reply immediately..
If you do not get a reply then your xbox is not configured with the correct ip address range for your network or your nic card in the xbox is stuffed.. It could be so many things..
I've tried the cmd thing but i keep getting an error message saying:
16-bit MS-DOS Subsystem
path to the program that you are trying to start or install
C:\Winnt\System32\config.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.
Then it just shuts down
I know how to fix this (somewhat) but thats gonna take some time to do. As for my ip address, it's not that. I've even changed the ip to my working xbox's ip and that didn't work either.
I am starting to believe that it is my nic card though.
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Sat Mar 25, 2006 4:13 am Post subject:
Sorry for being away for soo long i was away on 2 service calls, Im gonna get a hold of dagoat for ya, and if you want the fire walls off just go to control panels, and if you have XP SP2 it should be there. But im gonna bring dagoat over. _________________
Your 16-Bit error is probably because you downloaded SP2. I could be wrong. But try and type "command" instead. To fix this problem, uninstall SP2, then install it using a disc (it can be ordered and shipped for free from the M$ website.)
seems you have a bad year xbox, but those chips aren't TOO hard to replace, but I hope you're extremely handy with a soldering gun. I also think that member said he sells those chips, if not, I'll desolder (or try) one from my junk xbox mobo and send it out to ya. If you don't feel you can handle it, send me your board, and we'll see what's going on.
P.S. if you have one, check your chip with a multimeter, make sure everything's flowing correctly, could save ya a lot of problems in the future. _________________ "That which does not kill you, only makes you stronger."
XBox - 1.1, Samsung 616t DVD-ROM, 65GBWD 7200RPM Drive, Logitech Wireless
da-goat V.I.P. Lifetime
Joined: Jul 21, 2004 Posts: 701
Posted: Sat Mar 25, 2006 5:23 am Post subject:
hey.. if it is something internal, me or angelos would beable to get you taken care of. If you need it fixed NOW, i would go with angelos, im getting a lot of new people in, and that is a painstaking and time consuming repair. (there are 40 or so small pins to be unsoldered and resoldered.)
let one of us know (that is if you dont want to do it yourself)
goat _________________ XCM Halo 2 blue case
X3 Halo 2 blue Control Panel
XBOX v1.6b
Xecutor 3 CE
Xecutor3 3294 v16 plus
UnleashX
300gb Hard Drive
I do xbox mods in the Cincinnati, Ohio area and also take internet orders. PM or email me if interested.
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Sat Mar 25, 2006 5:25 am Post subject:
there ya go tenzo, got ya some help. They can take care of ya. _________________
tenzo Xbox-HQ Enthusiast Xbox Version: v1.6b Modded: Xecuter 3 CE
Joined: Mar 23, 2006 Posts: 24
Posted: Sat Mar 25, 2006 7:51 pm Post subject:
Thanks everyone for you help. This is a great site and ill be sure to recomend it to all my fellow xbox modders.
williams1234 Xbox-HQ Experienced Xbox Version: v1.6b Modded: Xecuter 3 CE
Joined: Jan 05, 2006 Posts: 135
Posted: Sun Mar 26, 2006 10:30 am Post subject:
Problem is in PC not xbox........Dracul is right. Possibly you have messed up the config file.........cant remember what its called . config.exe? Any way the program your ftping with disagrees with that file.....typical XP problem. Try connecting to another xbox to verify PC is the problem.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 10,400 | 
Guests: 1564 | 
Members: 1 
Forums 
