Posted: Wed Aug 03, 2005 12:50 am Post subject: Sofmod questions
Hi,
I want to softmod my Xbox and install the AID V2.02.
I've read the AID instalation and "SID Article for I-Hacked" pdf's that are Inside the Auto-Installer Deluxe v2.0.rar, but I've some questions...
1. Inside the folder tools there is two more folders:Softmod Installer Deluxe v3.0 and Softmod Installer Deluxe v3.0 GameShark. Should I use the content of both?
2. That one that are in rar should be unrar first? or it's just to copy the files to the Xbox?
3. I bought a copy of Splinter cell, but I can't find "load game" in main menu. The instructions manual have a reference to load profile content (where the picture show's load game - saves and levels.) It's here were I should load the softmod files?
4. I think I will use a modded xbox to copy the file to a USB device and then I will use that USB device to transfer the files into my Xbox HDD. Do you think that this can work?
Thanks! in advance
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Wed Aug 03, 2005 6:18 am Post subject:
1. the one is called gameshark, because its meant for use with a Gameshark. so use the other
2.open the first piece (lowest numbered or .RAR) and select everything inside and then hit Extract To and select a place to save. it will auto-open and exrtact the files from the all the pieces
3. do you have the first splinter cell game? the hack only works with the first splinter cell not the sequels. just look for a plalce to load a game onec you load the game
4. why not use a M$ memory card if you have access to a modded xbox?? if you want to use a usb, you first need to make a usb adapter, then format the jump/thumb drive on your xbox. you could then either put the gamesave on using the modded xbox/adapter or directly from your pc using Action Replay software. then use the adapter to transfer the gamesave off the usb to your xbox via M$dash
Rika Xbox-HQ Newbie
Joined: Jul 30, 2005 Posts: 4
Posted: Wed Aug 03, 2005 12:14 pm Post subject:
funkydopeloven wrote:
2.open the first piece (lowest numbered or .RAR) and select everything inside and then hit Extract To and select a place to save. it will auto-open and exrtact the files from the all the pieces
I believe that you are talking about this file :SID3.Splinter.Cell.Part1.Xbox-Hq.rar (6182 KB) but I must use this one SID3.Splinter.Cell.Part2.PAL.Xbox-Hq.rar (11 KB) too. Should I extract this one? to the same folder (UDATA)?
funkydopeloven wrote:
3. do you have the first splinter cell game? the hack only works with the first splinter cell not the sequels. just look for a plalce to load a game onec you load the game
What I've is Tom claney's Splinter Cell game from 2002, is not splinter cell 2 or 3.
funkydopeloven wrote:
4. why not use a M$ memory card if you have access to a modded xbox?? if you want to use a usb, you first need to make a usb adapter, then format the jump/thumb drive on your xbox. you could then either put the gamesave on using the modded xbox/adapter or directly from your pc using Action Replay software. then use the adapter to transfer the gamesave off the usb to your xbox via M$dash
I don't have a M$ memory card, but I have a USB adapter that came with a Xenium Ice chip.
Thanks!
Rika Xbox-HQ Newbie
Joined: Jul 30, 2005 Posts: 4
Posted: Wed Aug 03, 2005 10:46 pm Post subject:
Ok... I've already softmod my xbox, but it is not working... maybe something is missing
When I was instaling the dashboard (unleashx)I got the following error at the end:
Batch process failed
the last item was: .
action: rename
then everything went ok until the point 8 of the manual "install emulators"
after the reboot, xbox lives starts to connect and i'm getting the following message:
xbox live is not responding. try again later. (and I can't get out of that message)
The good news is that I can run splinter cell.
What can I do now
Thanks!
dangermouse Moderator
Joined: Jun 24, 2005 Posts: 972 Location: Tucson
Posted: Thu Aug 04, 2005 5:39 pm Post subject:
Hopefully you backed up the retail dash. Boot up Splinter Cell, delete all the files in c: and redo the mod. Patch the dash any you should be set. _________________ Xenium Ice 2.3.1 OS
200gb Seagate HDD
|HOTSWAP|Upgrade HDD|
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Thu Aug 04, 2005 5:51 pm Post subject:
Dang dangermouse! I remember your first posts and look at you now! HUAH!! _________________ http://twitter.com/HQ_Shark2th
Rika Xbox-HQ Newbie Xbox Version: v1.1 Modded: Xenium Ice OS v2.3.1
Joined: Jul 30, 2005 Posts: 4
Posted: Thu Aug 04, 2005 7:47 pm Post subject:
dangermouse wrote:
Boot up Splinter Cell, delete all the files in c: and redo the mod. Patch the dash any you should be set.
How can I do that?
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Thu Aug 04, 2005 8:08 pm Post subject:
re-load the gamesave in splinter cell, restore backup, and try again
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 10,311 | 
Guests: 1235 | 
Members: 3 
Forums 
