tgrillo33 Xbox-HQ Enthusiast Xbox Version: Xbox V1.6 Modded: Xecuter 3
Joined: Feb 01, 2005 Posts: 21
Posted: Tue Mar 29, 2005 5:44 pm Post subject: error code 6 with new softmod hd
i have just bought a new 160 gig samsung hd and have made a copy of my stock hd and put it on my new hd. i lock my new hd and put in my box and i get an error code six. can someone please help me with this?
Loki77 Xbox-HQ Freak Xbox Version: Xbox V1.6 Modded: Xecuter 3
Joined: Feb 21, 2005 Posts: 614 Location: Nebraska
Posted: Tue Mar 29, 2005 8:55 pm Post subject:
Hey,
First off, make sure you locked the drive. Did you use Chimp to copy the drives or did you just copy the contents of the hard drive to your pc, then Transferd the, over. ? Also make sure yuor jumpers are set to slave on your HDD, and master on the stock, but re-do this. beacuse error 6 basicly says it cant unlock the HDD, so make sure you also switch it to master when you are done hot swapping., if this is the method you are using.
tgrillo33 Xbox-HQ Enthusiast Xbox Version: Xbox V1.6 Modded: Xecuter 3
Joined: Feb 01, 2005 Posts: 21
Posted: Wed Mar 30, 2005 4:34 pm Post subject:
i used a modded xbox with a x3 in it and ftped the contents of the stock hd to my pc then i put my new hd in the modded xbox and then copied it to my new hd. then i used hdlock.exe to lock it when i was done. then i put the jumper to cable select and put it in my xbox and i get the error code six. i have been nessing around with it a little bit and i can use the password i got from the stock hd to lock it but i have to unlock it with the same password i used before. i have also tried the password i got from my new hd using liveinfo and i still get the error 6. what do i need to do with the eeprom.bin files? and is there a way i could flash the bios of my softmodded xbox?
Dark_Rebel Xbox-HQ Elite Member Xbox Version: All 1.0-1.6 Modded: Xecuter3 & Spiderchip
Joined: Nov 10, 2004 Posts: 347 Location: Belchertown, MA
Posted: Wed Mar 30, 2005 5:17 pm Post subject:
not to my knowdledge no. However, is your friends X3 soldered or solderless in his box? The easiest way to fix it (if solderless) would be to just put any chip in your box, use the AID and format the drive (to clear everything), copy the microsoft dash from AID, and then lock it again with the AID. Other than that, try formatting the hdd from the hard drive manager and start all over again _________________ Blue Chaos
pirrup V.I.P. Lifetime Xbox Version: All 1.0-1.6 Modded: Xecuter3 & Spiderchip
Joined: Feb 01, 2005 Posts: 1345 Location: belgium
Posted: Wed Mar 30, 2005 6:32 pm Post subject:
what to do :
make a backup from softmodded xbox eeprom (using evox)
ftp C and all the drives over to your pc, from softmod -> pc
k now first take a backup from eeprom chipped xbox (if you want )
put the new hd in the chipped xbox and prepare it with aid
ftp all the data back to this disk from pc
put config magic on chipped xbox and put the backup eeprom from softmodded xbox into data folder.
update xbox eeprom (in configmagic)
now lock this new disk with configmagic
voila locked and ready to use in softmodded xbox
if you want the chipped xbox back to original eeprom :
upload config magic and put backup eeprom from chipped xbox in data folder
update xbox eeprom (in configmagic)
Dark_Rebel Xbox-HQ Elite Member Xbox Version: All 1.0-1.6 Modded: Xecuter3 & Spiderchip
Joined: Nov 10, 2004 Posts: 347 Location: Belchertown, MA
Posted: Wed Mar 30, 2005 6:39 pm Post subject:
... with config magic you can lock the hard drive in the chipped box .. and then it works in the softmodded??? sorry if it seems a stupid question but i just never knew about this if its tru _________________ Blue Chaos
tgrillo33 Xbox-HQ Enthusiast Xbox Version: Xbox V1.6 Modded: Xecuter 3
Joined: Feb 01, 2005 Posts: 21
Posted: Wed Mar 30, 2005 9:55 pm Post subject:
ok..ill try that. but this morning i ran into another problem. my friend with the chipped box is not working anymore. i put my new drive in it and ftped all of it and then i turned his box off and turned it back on and nothing came up on the screen. the xbox turns on but i get nothing on the tv. it worked fine one min then the next min it doesnt work at all. i tried to turn it on and ftp it but i got nothing. has anyone ever heard of this? and if you have please help me out. im just about ready to say screw it and go out and get a mod chip, but i really want to learn how to do this.
ps....my friends xbox is not a solderless. me and him soldered it in there about a month ago and it has been working great up until now.
thanks for all your help so far
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 11,075 | 
Guests: 1509 | 
Members: 1 
Forums 
