Joined: Mar 11, 2005 Posts: 29 Location: Mexico, New York
Posted: Wed Mar 16, 2005 9:32 pm Post subject: Aladdin live w/ programmer-multiple problems
I just got an Aladdin Live with the programmer. I hook up the programmer and the mod chip, start the ALADlive .exe and it doesn't see my chip... I've checked all my settings and still nothing. I still installed it anyway to see if it came pre loaded...when I turn on my xbox it turns off,on,off then flashes green/red (I think it's FRAG). If someone could help I would appreciate it.
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Wed Mar 16, 2005 11:17 pm Post subject: yeahhh
where did u get the chip from ? might not be live but something else then the programmer wouldnt support it _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
Masked_Hacker Xbox-HQ Enthusiast
Xbox Version: V1.0 Modded: Aladdin Live
Joined: Mar 11, 2005 Posts: 29 Location: Mexico, New York
Posted: Thu Mar 17, 2005 12:37 am Post subject:
I got the chip and programmer as a package from Divineo.com...I have gotten my xbox to stop FRAGing...but the auto installer seems to be giving me problems now...The only thing it lets me do is format the harddrive...but then it says that it can't load all the apps and there may not be enough disk space and to ftp into it....HELP!!!!
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Thu Mar 17, 2005 9:09 am Post subject: yeahhh
if you can run the autoinstaller then use it to flash the chip .
use 1mb x2 4983.06 bios (if u have an xbox v1.0-1.4 ) or 1mb evox M8 plus16 if u have a 1.6 , then reformat the harddrive and try to install the rest _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
Masked_Hacker Xbox-HQ Enthusiast
Xbox Version: V1.0 Modded: Aladdin Live
Joined: Mar 11, 2005 Posts: 29 Location: Mexico, New York
Posted: Thu Mar 17, 2005 2:25 pm Post subject:
Now it started FRAGing again...did I erase the bios off the aladdin???If I could get this programmer that came with it to work I would feel better and it would clear up some things. For some reason the software doesn't see the chip so it won't read, write or verify... wish there was a lot more support for these. There are pictures all over the web but no documentation on the subject.
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Thu Mar 17, 2005 8:41 pm Post subject: yeahhh
you might have a bad chip ,
return it to divineo and get the duoX2 cromwell edition $17,
its a better chip , u can flash it through the network or from cd/dvd ,
also , i saw something on one of the aladdin websites that you need to connect one wire between the programer and the chip if the chip is not recognised but i dont know which points on the programer and the chip and i cant find that website again ,
also try different usb ports because you might not have enough voltage ,
and one more thing you can try is configuring the parallel port settings , i know there are different modes it comunicates with ...i havent had to configure it , mine worked right out of the box but you might need to _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
Masked_Hacker Xbox-HQ Enthusiast
Xbox Version: V1.0 Modded: Aladdin Live
Joined: Mar 11, 2005 Posts: 29 Location: Mexico, New York
Posted: Thu Mar 31, 2005 10:58 pm Post subject:
Thanks I finally figured it out...when you go into Aladdin Live setup it asks you which LPT port...it wants a three digit number so I put in 001 as in LPT1 but what is really asking for is the I/O range which mine is 378... the 3 digit number that the setup was looking for...DUH...I guess I need to change my Avatar to Idiot Inside!!! I think what my problem now is my HDD...
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum