Posted: Fri Nov 12, 2004 5:14 am Post subject: Xecutor 2.6 -red/green flashing light after flash bios, help
I installled two different xecutor chips now in a refurbished xbox 1.3 purchased from GameStop.com. When I originally boot, I get the cromwell bios. I next appear to successfully flash with the xecutor 4983.06_512k.bin on a cdrw containing the required dummy files. But when I reboot after enabling protection and switching back to bank 1, all I get is a black screen, and the ejection light flashes red and green. When I switch back to bank 2, the cromwell blue bios screen appears again, an I can reflash or use a different bios. WHY WONT THIS WORK. My first mod was an xbox 1.1 and worked without difficulty. Any help will be greatly appreciated.. I have read alot and am running out of ideas.
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Fri Nov 12, 2004 6:07 am Post subject:
It has to be a bios issue. Unfortunately, I don't have too much X2.3 experience. Hopefully, some of our X23 members will ring in. Did you use the exact same bios for both machines? _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
tkteun Xbox-HQ Newbie
Joined: Nov 17, 2004 Posts: 1
Posted: Thu Nov 18, 2004 12:39 am Post subject:
I've had this with my chip installation. It worked perfectly, but when I flashed it, it FRAG'ed all the time. I've solved this now by buying a programmer (my bank 2 was also screwed). And I didn't have any problem at all
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum