Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sat May 14, 2005 3:14 pm Post subject: Auto-Installer Deluxe v2.0 Help
Please post any questions requiring help here.
Before doing so, in order to make things easier for us and you, please try and do the following before posting:
1) Read the manual carefully, atleast twice. This should be able to cover about 80-90% of your problems.
2) Check the current posts, it may have already been covered.
If you can do these two things, we will be able to get more problems dealth with easier. I will also be making a thread regarding errors if any do appear.
Enjoy...
Last edited by DJB on Tue Aug 02, 2005 8:09 am; edited 1 time in total
totalylost Xbox-HQ Experienced
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Sun May 15, 2005 3:21 am Post subject:
Ok i know this is stupid DJB, but I have gone through all the Auto install deluxe 2.0 zip file looking for the tools folder and can't seem to find it. I have been through them all. I just find a apps zip with that only has dvdx and dvdsxbox in it? Can you tell me how to locate the tools folder in the archive?
totalylost Xbox-HQ Experienced
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Sun May 15, 2005 3:27 am Post subject:
Nevermind DJB I figured out wwhat I was doing wrong. But I appreciate the help you are giving me.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun May 15, 2005 3:28 am Post subject:
totalylost wrote:
Ok i know this is stupid DJB, but I have gone through all the Auto install deluxe 2.0 zip file looking for the tools folder and can't seem to find it. I have been through them all. I just find a apps zip with that only has dvdx and dvdsxbox in it? Can you tell me how to locate the tools folder in the archive?
Firstly it's a RAR file not a ZIP file. You've unzipped Softmod Installer Deluxe v2.0 not Auto-Installer Deluxe v2.0 by the sounds of it.
When extracted it comes up with a folder called Auto-Installer.Deluxe.v2.0.Xbox-Hq, if you look inside that, you should find the Tools folder.
Hope that helps...
totalylost Xbox-HQ Experienced
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Sun May 15, 2005 3:54 am Post subject:
Yeah I figured out that I was in the wrong thing. Also had to re download the auto installer archive. man How long does it take. Is there a ftp server that has this that would be faster? Im on dsl and just barely downloaded one block.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun May 15, 2005 4:39 am Post subject:
FTP wil be coming soon.
rubino Xbox-HQ User
Joined: Mar 15, 2005 Posts: 15
Posted: Sun May 15, 2005 7:17 am Post subject: e-mule?
Hi DJB
Is there a chance that this can be shared over e-mule also?
I can't get ant bit torrent clients to work
thanks for this - been waiting for it
rubino Xbox-HQ User
Joined: Mar 15, 2005 Posts: 15
Posted: Sun May 15, 2005 8:04 am Post subject: forget my last question
I just paied for VIP membership, and hopfully I can soon download via the FTP server
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun May 15, 2005 10:37 am Post subject:
OK.. Here's the deal with the FTP servers.
VTknightmare's FTP server should have AID 2.0 in around 8-10 hours maximum, and LordSith's FTP is queued up and ready with AID 2.0 just as soon as I upload the SID 3 translation packs for the site.
It's quite a big process since basically I'm doing this all myself (with thanks to forhaobby for upping it to Vtknightmare's FTP for me), but it's nearly almost done...
Rubino, thanks for donating as a VIP member, you have definately made a good contribution to us, and not just with the donation, the translation you done aswell should help out many ppl I hope. As far as your emule question goes, I'm sure it'll eventually find it's way on there, just like Kazaa and the other P2P communities, I only picked bit torrent because of it's ease and reliability.
totalylost Xbox-HQ Experienced
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Sun May 15, 2005 9:44 pm Post subject:
Question? When I copy the file from my pc to my AR card do I just copy the rar or do I need to extract it then copy the files to the AR card.
I tried just the rar byself but can figure out how to get it from card to hdd on xbox. Help please?
Dynami Xbox-HQ Newbie
Joined: May 08, 2005 Posts: 9
Posted: Mon May 16, 2005 6:58 pm Post subject:
I can load MS Dash 5960 from Unleashx... but can't I make MS Dash the boot Dash?
TIA
Dy
totalylost Xbox-HQ Experienced
Xbox Version: v1.4 Modded:
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Tue May 17, 2005 2:23 am Post subject:
DJB I extract the aid 2.0 and went in to the tools folder all that was there was the softmod installer folder and the sid files in it. is the updater in one of the aid 2.0 rars?
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Tue May 17, 2005 8:33 am Post subject:
Quote:
DJB I extract the aid 2.0 and went in to the tools folder all that was there was the softmod installer folder and the sid files in it. is the updater in one of the aid 2.0 rars?
Unpack the AID2 and look in this folder for the updater:
\Tools\AID 2.0 ISO Updater
Its a .exe and it also required the rar.dll file which is there.
Great tool. Very simple to use and a must have for AID2 users.
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Tue May 17, 2005 11:47 am Post subject:
Cheers for helping out FH, I'm starting to feel the burnout effect now hehe.
totalylost Xbox-HQ Experienced
Xbox Version: v1.4 Modded:
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Tue May 17, 2005 1:26 pm Post subject:
Sorry guys. After I posted that I went in to one and found it.
I have a question though about burning the iso. I started the burn the cd with dvd decryter and I recieved and error I don't remeber exactly what the first part said but the last thing was at the bottom of window of the error and it said access denide. I clicked ignore and it proceeded to burn the iso to dvd. It completed fine and verified with no further errors.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum