Posted: Wed Apr 20, 2005 10:19 pm Post subject: Need Your Guys Help
Hey Guys,
A little history on my v 1.4 xbox; modded with the Xecuter 3CE (sucessfuly installed); sucessfuly flashed with 3029 bios; X3 Control Panal (completly installed)
Whating to install Maxtor 200GB HDD.
Heres my question I tried useing AutoInstallerDeluxe 1.01 and it didnt work when I tried to boot it with my new HDD connected. So I think the best thing for me to do is reflash my bios with a different one.
So what bios do I need, and how do you reflash a bios???
I have a little less then a week to finsih this mod or im never going to finish it; moveing outa state
Thanx guys
Cantgetright Xbox-HQ Elite Member
Xbox Version: v1.3 Modded: Xecuter 3 CE
Joined: Feb 03, 2005 Posts: 256 Location: Jersey
Posted: Wed Apr 20, 2005 11:44 pm Post subject:
Chem
It's not your bios. You can boot to your x3 live and format your drive from there.
What dvd drive do you have? Once I have my bios flashed, I pop in the installer, shut down and reboot. _________________ Xbox v1.3
x3ce modchip 3294/3108 Bios
250 hdd Western Digital
Ava Dash v49.3
Built w/HQ-AID v1.01
TheModGod Xbox-Hq Legendary Xbox Version: v1.3 Modded: Xecuter 3 CE
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Apr 21, 2005 2:28 am Post subject:
yeah, I wouldnt be reflashing. The X3 flash sucks enough no need to do it all over again.
I bet th same thing....you probably need a different type of DVD brand disk. I would stick with DVD-R
Once you have the disk burned, put it in the dvd drive and at the X3 config live, basically I select Reboot to Dashboard or whatever, and it will boot the disk for me.
TheModGod
---------------------
http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
chemicalbrother Xbox-HQ Enthusiast
Joined: Apr 07, 2005 Posts: 44
Posted: Thu Apr 21, 2005 3:59 am Post subject:
I have a Samsung DVD drive and Im useing maxell DVD-R's.
I d/l AID 1.0 off of your guys srver just to see if it wasnt maybe just the verion I got before (AID 1.01).
Heres what I did I burned AID 1.0 useing DVDDecrypter and then (with my retail HDD hooked up) i opened the DVD drive put the AID disk in, closed it, I then just got my bios screen. So I truned my xbox off and then turned it on again and it went to the "flying through space" intro. After a bit it went to screen where I can select from :
Format/Perpare HDD,
Install Microsoft Dashboard
Install Hacked Dashboards
Install Applications
Install Emulators
Tools
Boot Dashboards
Tuen off Xbox
So now that I knew the disk works I turn off my xbox (with the disk still in) connected my new 200GB HDD truned my box back on I got the flubber and after a few seconds my harddrive started makeing a noise like it was skipping, then I got the green error screen that says error 09.
What do you guys think is causeing this? Cause isnt AID suppose to detect a new HDD when its booted?
I got my HDD off of modchipman.com where they said already "the hard drive comes ready with an image of your XBOX on it, just plug and play and your xbox will go from stock 8-10gb to a 200gb drive"
Im not sure what Im doing wrong, and I know theres others haveing this problem
Thanx for Your time guys
chemicalbrother
chemicalbrother Xbox-HQ Enthusiast
Joined: Apr 07, 2005 Posts: 44
Posted: Thu Apr 21, 2005 6:10 am Post subject:
[Once you have the disk burned, put it in the dvd drive and at the X3 config live, basically I select Reboot to Dashboard or whatever, and it will boot the disk for me. ]
I cant even get that far with my new HDD connected.
chemicalbrother[/quote]
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum