Posted: Mon Nov 11, 2013 12:35 am Post subject: I've messed up (i think) my modded Xbox
Ok here's the deal, i hope someone awesome will help me with this...
I bought a modded xbox with a Xecuter modchip (not sure about the version)
It used to boot fine on a unleashX dashoard etc etc...
Now being reckless as always, after i had some problems with running some backups i tried to reinstall a bios from the unleashX flasher... the flashing went fine... but that's where everything went bad...
Now when i try to boot up my xbox, the power light goes orange for a second (like it used to before loading the custom dashboard) and then reboots, powers up with a green light and goes to the MS dashboard... at this point nothing works on it, it only runs retail games like a original console...
How bad i've messed up?
Sorry for the lack of information but i'm a total noob on xbox modding...
Thanks
SPPV V.I.P. Lifetime
Joined: Sep 13, 2010 Posts: 2644 Location: Kamloops BC Canada
Posted: Mon Nov 11, 2013 1:45 am Post subject:
In a nutshell you did a software f#&@ up. Either the MS files or the dash. There is NO released Ux that can flash chips so if you were ACTUALY using Ux its impossible you modified the BIOS. Unless you hacked my PC and stole a beta of Ux.41, which we both know did not happen lol. Are you possibly mistaken and were using Evox? Its very important to know what dash you were using as it eliminates or includes variables.
Vapordrago Xbox-HQ Newbie
Xbox Version: V1.6b Modded: Babylon3 GS
Joined: Nov 10, 2013 Posts: 8
Posted: Mon Nov 11, 2013 5:47 am Post subject:
SPPV wrote:
Are you possibly mistaken and were using Evox? Its very important to know what dash you were using as it eliminates or includes variables.
You're right sorry i was using Evox, mixed up all the names from browsing for hours in search of some hope...
Last edited by Vapordrago on Mon Nov 11, 2013 5:49 am; edited 1 time in total
Vapordrago Xbox-HQ Newbie
Xbox Version: V1.6b Modded: Babylon3 GS
Joined: Nov 10, 2013 Posts: 8
Posted: Mon Nov 11, 2013 5:48 am Post subject:
double post
Vapordrago Xbox-HQ Newbie
Xbox Version: V1.6b Modded: Babylon3 GS
Joined: Nov 10, 2013 Posts: 8
Posted: Wed Nov 13, 2013 6:00 pm Post subject:
I'm still stuck... any idea on how i should solve this? if it is possible?
SPPV V.I.P. Lifetime
Joined: Sep 13, 2010 Posts: 2644 Location: Kamloops BC Canada
Posted: Wed Nov 13, 2013 7:25 pm Post subject:
Since it was Evox there is a good chance youve wiped the BIOS or corrupted it. A few options for fixing this.
1)An external programmer (if your chip supports it and you can find/make one)
2)Disable the chip, softmod it, then try to reflash the chip via Evox
3)Remove the chip and softmod it
Vapordrago Xbox-HQ Newbie
Xbox Version: V1.6b Modded: Babylon3 GS
Joined: Nov 10, 2013 Posts: 8
Posted: Fri Nov 15, 2013 10:24 pm Post subject:
SPPV wrote:
Since it was Evox there is a good chance youve wiped the BIOS or corrupted it. A few options for fixing this.
1)An external programmer (if your chip supports it and you can find/make one)
2)Disable the chip, softmod it, then try to reflash the chip via Evox
3)Remove the chip and softmod it
I decided to softmod my Xbox, in a week i should have a copy of splinter cell in the mail, and i'm adding a USB port to my controller (lots of tutorials around on how to do that)
Any advice on removing / disabling the chip correctly?
SPPV V.I.P. Lifetime
Joined: Sep 13, 2010 Posts: 2644 Location: Kamloops BC Canada
Posted: Sat Nov 16, 2013 6:04 am Post subject:
Since its an Xecuter it should have a switch to turn the chip off.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum