Posted: Thu Aug 02, 2012 8:05 am Post subject: Resurrecting a derelict 1.3, missing components on board. =(
Hello all.
Post round 2, after looking at mainboard pics and comparing to my board, it looks as if some form of cola of doom was spilled in it and has completely dissolved the solder from the pads.
I'm getting a few semi-dead xbox boards in the next few days so a last resort will be nicking the bits off of one of them but if anybody has the values of the parts missing or a service manual it would be helpful as i'd like to replace the components from new. The other boards i'm getting look rather fixable so I'd prefer not to ruin one of them to fix this one.
Again, any help is appreciated, thanks.
DSC00014 (2).JPG
Description:
Filesize:
882.37 KB
Viewed:
562 Time(s)
Prehistoricman Moderator
Xbox Version: 1.6 crystal Modded: Xecuter 3
Joined: Oct 09, 2011 Posts: 406
Posted: Sat Aug 04, 2012 3:43 pm Post subject:
I'd imagine you would have to have another 1.3 board or a schematic of that board to replace the components that seem to have gone.
Has this board been kept in the case? If so, the components might be hiding under the mobo. _________________
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Thu Aug 23, 2012 9:16 pm Post subject:
If you're good enough at soldering you may be able to extract those pieces from another 1.3 board and install them onto that board. It would be extremely tough though and there is no guarantee that it would work.
Does the Xbox not work in its current state? I knocked a piece off the top of my 1.6's board when I was modding it years ago and it still works perfectly fine as far as I can tell. _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum