Posted: Sat Dec 15, 2007 7:33 am Post subject: Error 13 - can't seem to get a boot disk to work
Hi,
I'm trying to set up a new hard drive in an older xbox (version 1.2 with an X2) and I'm constantly getting an error 13. I've tried a both the Slayers and AID 4.10 Lite and still haven't had any luck. I thought that perhaps the drive just wasn't reading the discs so I attempted to put a PC CDROM drive in (set to SLAVE) and that didn't seem to work either. I've tried both CD-R and CD-RW media with no luck. I'm currently downloading 4.10 full/non-lite and will burn to a DVD-RW (don't have any blank DVD-Rs currently) but am not holding out a whole lot of hope.
Does anyone have any ideas or suggestions that might help me out?
Thanks!
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat Dec 15, 2007 1:54 pm Post subject:
Your best bet wold be to put the aid 4.10 iso on a cdrw or dvd-r, and what app are you useing to burn it?
ark23 Xbox-HQ Newbie
Joined: Jun 02, 2004 Posts: 5
Posted: Sat Dec 15, 2007 2:18 pm Post subject:
I'm using Nero to burn the image. I've tried to a CDRW. I can give it another shot. Should I use DVD Decrypter instead?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat Dec 15, 2007 2:41 pm Post subject:
Yeah man you can give that a go and make sure your set to the lowest setting on the burner speed.
If you do retry with nero make sure its at lowest speed and that you use nero image burn and not burn data to disk.
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Sat Dec 15, 2007 7:36 pm Post subject:
May also be the brand of CD/DVD your using. Some xboxes wont read certain brands while others can read that brand. _________________
ark23 Xbox-HQ Newbie
Joined: Jun 02, 2004 Posts: 5
Posted: Sun Dec 16, 2007 12:51 am Post subject:
Wanted to post an update. Didn't have any luck with the CD-R(W)/DVD-R(W)s. What I ended up doing to get it to work was use xboxhdm to get the drive set up.
-I extracted the necessary C drive files from a copy of Slayers 2.7 to the xboxhdm c drive
-copied my xbmc dashboard to the proper location within xboxhdm.
-Ran the bat file to make my Linux xboxhdm ISO.
-Burned it.
-Hooked my desired xbox hard drive up to my PC as Primary Master
-Hooked my PC CD ROM as Primary Slave
-Booted off the burned ISO
-went to the VGA console and ran the xboxhdm prog and choose create a drive from scratch
That last step walked me through partitioning/formatting the drive and then copied over the files I had set up for the C and E drives. At this point I was able to then drop the drive into the Xbox and get it to boot off the dash. From there I could ftp over anything else I needed.
Here's a link to the tutorial that helped me out a bit:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,104 | 
Guests: 1263 | 
Members: 1 
Forums 
