Joined: Jan 20, 2007 Posts: 15 Location: Worcester, Mass
Posted: Sat Feb 03, 2007 1:42 pm Post subject: Need Help With Leds Wiring
I am looking to add some bright Leds to my modded X-Box. If anyone some has any info on them I would appreaciate it. Basically looking for the right size diode and Led to use. Oh and has any one every built there own clear jewel. I have some pretty thick peices of plexiglass and lexan about 3/4 inches thick. I want to try to build my own. I want to use a thin peice and fog in the X and then heat seal that peice to a 3/4 inch peice with an led mounted underneath it to light it up. Any info or ideas would help out. Thanks a million.
bluezone Xbox-HQ Freak
Joined: Sep 19, 2006 Posts: 550
Posted: Fri Feb 09, 2007 12:11 pm Post subject: leds in xbox
Hi there i have just finshed making a flasher unit very tiny and running 6 leds off it in my crystal xbox running it on a fan splitter cable off hdd. its running off 5volt. Thay are normal red led's but would work the same for bright ones. I have photo on my site of the flasher and will have diagram on site soon. If you just want leds in the case dont install the flasher but you will still have to install a resister on the leds.
Posted: Sat Feb 10, 2007 4:00 pm Post subject: lights in xbox
here are too diagrams i made up i have the flasher in my crystal xbox running 6 leds.
flasher.gif
Description:
flasher
Filesize:
10.41 KB
Viewed:
0 Time(s)
leds.gif
Description:
Leds
Filesize:
3.75 KB
Viewed:
315 Time(s)
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum