Posted: Mon Nov 15, 2004 6:27 pm Post subject: to aladdin
"The Aladdin XT as with original Aladdin Live works fine with 1.6A, but with 1.6B a switch is needed on the XT."
4 questions about this.
When you reference "a switch" are you referring to atattching a switch to the programmer/xt setup?
Does this "switch" setup work for XT 4064's?
Does the write-protect on the 4064 get bypassed with the switch?
Where are the instructions for setting up the "switch"?
thx for any help, I really want to use my 160 gig harddrive!
looseunitnz Xbox-HQ Newbie Xbox Version: Xbox V1.1 Modded: Aladdin ICE
Joined: Aug 30, 2004 Posts: 6 Location: New Zealand
Posted: Wed Nov 17, 2004 1:10 am Post subject: This is what I know
Hi guys, I've installed over 30 aladdin xt chips and I get about 40% v1.6s I have a couple of problems (esp frag conditions) but most have been due to wires - so first check them. Then check the bios on the chip - although your pretty screwed if you don't have the external programmer at this point (if it is stuffed) though. Aladdin mentioned http://www.aladdinlive.com/mod/ in respect to the programmer, if it doesn't detect your chip go there. The best install diagrams I have found are at http://www.x-mods.co.nz/tutorials.php?tid=31 and http://www.x-mods.co.nz/tutorials/aladdinv16.pdf which also shows the orientation of the chip when in place.
Some tips :
Connect D0 on m/board to D0 on chip. But if you choose to connect it to ground, all screw holes through m/board are grounded.
On v1.0 - v1.5, There is an alternative D0 point on the underside which I always use and I think is easier to solder to. Then I feed the D0 wire and the Hdd wire (L2) through the unsoldered holes in the LPC and up onto the chip - very tidy! - I have included a pic of the point but you can double check this point is connected to the usual D0 point with a multimeter.
Hope this sorts out some of the problems ppl
Cheers Dan
install photo 014.jpg
Description:
Filesize:
317.07 KB
Viewed:
1616 Time(s)
_________________ XBOX v1.1:
Aladdin ICE Modchip
Evox M8++ (large HDD) Bios
200GB Samsung HDD
EvoX 3935 Dashboard
Clear Blue Case w UV LEDs
Blue/Red Power/HDD LED
looseunitnz Xbox-HQ Newbie Xbox Version: Xbox V1.1 Modded: Aladdin ICE
Joined: Aug 30, 2004 Posts: 6 Location: New Zealand
Posted: Wed Nov 17, 2004 1:15 am Post subject:
holy shit that was a little big and fuzzy! lol sorry guyz _________________ XBOX v1.1:
Aladdin ICE Modchip
Evox M8++ (large HDD) Bios
200GB Samsung HDD
EvoX 3935 Dashboard
Clear Blue Case w UV LEDs
Blue/Red Power/HDD LED
revnev Xbox-HQ Newbie Xbox Version: Xbox V1.1 Modded: Aladdin ICE
Joined: Dec 07, 2004 Posts: 1
Posted: Thu Dec 09, 2004 1:01 pm Post subject: Re: Chip placement
zer0 wrote:
Hey Aladdin, in what direction am i supposed to put the chip onto the pin header on the mother board? is there a picture of a mounted aladdin live+ somewhere? Another thing, do i need to use a special kind of wire for the D0 point, or can i use the one that came with the chip?
liveplacement500.jpg
Description:
Is this what your looking for
Filesize:
54.72 KB
Viewed:
1406 Time(s)
davepyne Xbox-HQ Newbie Xbox Version: Xbox V1.1 Modded: Aladdin ICE
Joined: Jul 02, 2004 Posts: 1
Posted: Fri Dec 31, 2004 8:10 am Post subject: Doh, its the DO!
xbostin, thank you. Your solution solved my problem. Connecting the DO point on the motherboard to a ground point was just what I needed to do. It works well now. Now all I gotta do is install a switch so I can use original TSOP also. Thanks again,
-Dave.
Aladdin V.I.P. Lifetime Xbox Version: 1.6C Blue Modded: Aladdin Extreme
Joined: Jul 07, 2004 Posts: 59
Posted: Tue Jan 11, 2005 10:05 am Post subject: Use this Bios and put pins this way
Use the bios on www.aladdinlive.com/mod for your 1.6, it is easier to use the flash ISO in XBHQ downloads to flash the chip. You can also see an image on the page of how to place the chip.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,580 | 
Guests: 1181 | 
Members: 0 
Forums 
