Windows IP Configuration
Host Name..................:DAN-PF68LBC21
Primary Dns Suffix......:
Node Type..................:Unknown
IP Routing Enabled......:Yes
WINS Proxy Enabled....:No
Ethernet adapter Local Area Connection:
Media State.................:Media disconnected
Description..................:Intel(R) PRO/100 VE Network Connection
on
Physical Address..........:00-0C-F1-F1-76-CA
PPP adapter alltell: (alltell=my dialup internet)
Connection-specific DNS Suffix:
Description.................:WAN (PPP/SLIP) Interface
Physical Address.........:00-53-45-00-00-00
Dhcp Enabled..............:No
IP Address..................:(removed)
Subnet Mask................:255.255.255.255
Default Gateway..........:216.96.110.80
DNS Servers...............:166.102.165.11
166.102.165.13
top_shotta89 Xbox-HQ Elite Member
Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: Apr 21, 2006 Posts: 222
Posted: Tue Jul 04, 2006 7:23 am Post subject: .....
all i did was set my network settings on my xbox to DCHP t hen turn off the fire wall and enable your network connections n restart ur xbox
xotooxflyox Xbox-HQ Member
Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: May 20, 2006 Posts: 73
Posted: Tue Jul 04, 2006 8:38 am Post subject:
this is what you need to do.....
1. Go into your xbox network and set your settings to Static, you ip address should be 192.168.0.3 your netmask should be 255.255.255.0, default gateway should be 192.168.0.1, and your DNS server should be 192.168.0.4
2. On you computer go to control panel, network connections, right click on you local area connection and go to properties. click on internet protocol and click properties, you should see that there is a a green dot on "obtain an ip address auto." click on "use the following ip address" from there type in where it says "ip address" 192.168.0.4 then click ok.
3. use a "crossover cable" to connect your xbox to your ethernet
4. restart your xbox (if its on)
5. open up the software your using to FTP, if your using flashfxp go to quick connect, where it says "server or Url" type in 192.168.0.3. Username is xbox, password is xbox, click connect
That should be connected!
danmyers686 Xbox-HQ Member
Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: Jul 01, 2006 Posts: 59 Location: ohio, usa
Posted: Tue Jul 04, 2006 3:02 pm Post subject:
xotooxflyox: I have tried your method and many others that are simalar but no luck. Im going to go buy a crossover cable just so i know that its not the problem. But according to http://www.littlewhitedog.com/content-8.html I have a crossover cable already.
top_shotta89 Xbox-HQ Elite Member
Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: Apr 21, 2006 Posts: 222
Posted: Tue Jul 04, 2006 8:24 pm Post subject: ....
lol n nwhats the difference when u put the settings to dchp and static DCHP connects without putting the ip address or any of that
xotooxflyox Xbox-HQ Member
Xbox Version: 1.6 Modded: Softmod Installer Deluxe
Joined: May 20, 2006 Posts: 73
Posted: Tue Jul 04, 2006 8:38 pm Post subject:
try this instead of using a crossover cable, try a regular cable. because i remember my first time, i used a crossover and it didnt work but then i used a regular and it worked. i dunno y that is but thats just how it was.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum