Posted: Mon May 08, 2006 4:13 am Post subject: Cant Enable 720p, Or Progressive In General
Okay,
Finally got everything running. I used AID 3.0 to install Unleash X v0.38 as my dash, and a bunch of other apps and MS dash 5960 from the disc. This was all installed onto a brand new 120gig HDD and an XBOX 1.0.
I loaded everything from AID 3.0, loaded into Unleash X and I can see the options for ENABLE 720P, 480P, 1080I but they're non-changeable features. I go into MS DASH from inside Unleash (using the boot to MS dash option) and when I go to Video settings and select WIDESCREEN I dont get the enable options like I did on my 1.4 box (non-modded).
My Xecuter 2.6 is running the 5035 old bios since its pre-1.6. I didn't make any changes to the BIOS. Simply pulled frm XBins and flashed to bank 2 on the chip.
For those who have done this in the past w/ a new drive... what do I need to do to get this working? I have a HIDEF pack I want to get loaded ASAP so I can put this on my 50" DLP.
Its been a VERY long time since I had to enable my HD pack... is there something I need to do out of the box since its a new install?
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Mon May 08, 2006 7:24 am Post subject:
Is your xbox a PAL or NTSC???
If you are running xbox in PAL mode you will NOT get any HI-DEF OPTIONS at all.. You will need to use the ENIGMAH VIDEO SELECTOR..
Its also on the AIDeluxe.
It can switch your xbox from PAL to NTSC and then the options should be there.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,269 | 
Guests: 1011 | 
Members: 1 
Forums 
