Posted: Mon Feb 13, 2006 5:05 am Post subject: please help
caution, I am a complete idiot, I had some kid my brother in-law knew do the work other then pressing the button I can't do much more
chip is Xenium ICE
box i version 1.0
has worked well for the last year, but problem today
hit the power button, does the start/stop thing a few times then the lights flash reg/green, which means fraged correct?
if I remove the chip it will load up like a stock box, so I think it is ok
if I flip the switch it says somthing about an ide controler then says load ATX cluster. out of data while reading cluster ##########
got from HD
up at the top it says idle error 10, then it shuts off
I have removed the chip and the adaptor several times to check contacts, don't see anything wrong
so to write so much, and thanks for any help, please write all info so a first grader could follow along
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Mon Feb 13, 2006 5:25 am Post subject:
Well any clue as to what you might have deleted or did in order to get this happening? You might have simply deleted some dashboard files or something so if that is what happened I would suggest putting the chip in exactly how it was....and then try loading aid 3 (if you can get to the xenium main screen)....is this a solderless or a soldered install by the way.....if its a solderless are all the points lighting up....later. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
solid_snake Xbox-HQ Experienced Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Jan 11, 2006 Posts: 146 Location: Chicago by day, Aurora by night
Posted: Mon Feb 13, 2006 6:29 am Post subject:
sounds like a corrupt XOS, try running a recovery from cd/dvd....
follow that guide.... _________________ Xbox-V1.1-Xenium GOLD OS 2.3.1-X2 5035
[u]My First Build[/u]
ViewSonic VX2025 20.1" WS
Aspire X-Cruiser
AMD Athlon X2 4600+ @ 2.64 (stock@2.4)---Zalman 9500 Cooled
MSI 7950GX2 @ 550/1320Mhz
2GB Corsair XMS DDR2 800 (@DDR2880)-(5-5-5-12 T1)
Asus M2N32-WiFi
2 x Maxtor 160GB SATA II
WD 120GB EIDE
LiteOn DVD-R/RW/RAM
Ultra-X 600W PSU
Logitech Z5500
rsr20002 Xbox-HQ Newbie Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Feb 12, 2006 Posts: 8
Posted: Mon Feb 13, 2006 10:40 pm Post subject:
nothing has been deleted or changed since I last played it, the only time it will show anything on the screen is when I flip the switch (this is the recover swtch correct?) and then it just shows that error screen, it wont load into anything else, I aso don't have acces to a cd burner so making a disk might be a problem
this is a solderless chip, what do you mean by "are all the points lighting up"
thanks again for the help
solid_snake Xbox-HQ Experienced Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Jan 11, 2006 Posts: 146 Location: Chicago by day, Aurora by night
Posted: Tue Feb 14, 2006 6:51 am Post subject:
do you have any way of ftping to the box? if not you are going to need a recovery cd... _________________ Xbox-V1.1-Xenium GOLD OS 2.3.1-X2 5035
[u]My First Build[/u]
ViewSonic VX2025 20.1" WS
Aspire X-Cruiser
AMD Athlon X2 4600+ @ 2.64 (stock@2.4)---Zalman 9500 Cooled
MSI 7950GX2 @ 550/1320Mhz
2GB Corsair XMS DDR2 800 (@DDR2880)-(5-5-5-12 T1)
Asus M2N32-WiFi
2 x Maxtor 160GB SATA II
WD 120GB EIDE
LiteOn DVD-R/RW/RAM
Ultra-X 600W PSU
Logitech Z5500
rsr20002 Xbox-HQ Newbie Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Feb 12, 2006 Posts: 8
Posted: Tue Feb 14, 2006 12:50 pm Post subject:
I can hook the laptop up to it, but have not tried this before, will give it shot after work
will I be able to do this since I can not get to any menu screen?
solid_snake Xbox-HQ Experienced Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Jan 11, 2006 Posts: 146 Location: Chicago by day, Aurora by night
Posted: Tue Feb 14, 2006 6:10 pm Post subject:
if you dont have a way of finding the IP address of your xbox as well as allowing ftp then you are gonna need a recovery cd...you have absolutely no access to a burner? _________________ Xbox-V1.1-Xenium GOLD OS 2.3.1-X2 5035
[u]My First Build[/u]
ViewSonic VX2025 20.1" WS
Aspire X-Cruiser
AMD Athlon X2 4600+ @ 2.64 (stock@2.4)---Zalman 9500 Cooled
MSI 7950GX2 @ 550/1320Mhz
2GB Corsair XMS DDR2 800 (@DDR2880)-(5-5-5-12 T1)
Asus M2N32-WiFi
2 x Maxtor 160GB SATA II
WD 120GB EIDE
LiteOn DVD-R/RW/RAM
Ultra-X 600W PSU
Logitech Z5500
rsr20002 Xbox-HQ Newbie Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Feb 12, 2006 Posts: 8
Posted: Sat Mar 04, 2006 1:31 am Post subject:
ok I finaly got hold of a cd burner, and have tried several times to follow the guide, could someone just email me the files I need to burn?
rsr20002 Xbox-HQ Newbie Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Feb 12, 2006 Posts: 8
Posted: Wed Mar 08, 2006 12:50 am Post subject:
where can I find a "large" RAR file?
do I need to use nero?
just trying to work through the guide
impwiz V.I.P. Lifetime Xbox Version: all Modded: everything
Joined: Aug 30, 2005 Posts: 1070 Location: Detroit
Posted: Wed Mar 08, 2006 1:01 am Post subject:
This is a dummy file, if that's what you're looking for. _________________
rsr20002 Xbox-HQ Newbie Xbox Version: all Modded: everything
Joined: Feb 12, 2006 Posts: 8
Posted: Wed Mar 08, 2006 2:25 am Post subject:
ok so I burned a disk with the two files on it, sitck it in
with the switch in one way it does the same thing as before, with it the other way all the lights go green and then it doesn't do any thing, I left it sitting like that for quite awhile
what do I do now?
rsr20002 Xbox-HQ Newbie Xbox Version: all Modded: everything
Joined: Feb 12, 2006 Posts: 8
Posted: Mon Mar 13, 2006 11:23 pm Post subject:
so nobody has any ideas? any one in the salt lake area that could help?
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 1:22 am Post subject:
if the recovery cd didnt work I think your going to have to get your hands on a chip programer if im not mistaken. _________________
rsr20002 Xbox-HQ Newbie Xbox Version: all Modded: everything
Joined: Feb 12, 2006 Posts: 8
Posted: Tue Mar 14, 2006 3:00 am Post subject:
could I just put in a new chip?
I can handle the basic click this or that, but I am much more of a "see broken part/replace broken part" kinda guy
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 3:03 am Post subject:
why replace it if it isnt broken? It just needs to be reprogramed.
sounds like if a computer program screws up replace the computer, does that make any sense? _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 19,408 | 
Guests: 5314 | 
Members: 0 
Forums 
