Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Feb 10, 2006 Posts: 40
Posted: Wed Mar 08, 2006 8:28 am Post subject: i just wann get this box runnin asap at lowest cost possible
I have a xbox version 1.0. The hard drive Is completely blank. I tried using the hot swap method in order to get it up and running. But I somehow was not successful. Unfortunately I blew the stock Seagate and now the harddrive doesn’t work period. I have another spare 50 gig that I can use. My friend gus738 told me about getting a chip for the xbox. He told me what the chip does because I am completely unfamiliar with chips for the xbox. I’m trying to figure out what type of chip to buy , how much it would/might cost me , and I prefer non-solderless if that is an option. Any ideas , someone please help me!!
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Wed Mar 08, 2006 2:09 pm Post subject:
Non-solderless? So you wish to pin solder the chip and that's cool.
I prefer the Xenium myself but I'm biased.
They offer solderless and pin solder models (it's the same plus or minus the mount, that's all)
There are cheaper chips, but I've read a lot of horror stories with them.
Mainly with flashing bios issues.
Study a bit, decide what you wish to do and we will guide you to the proper stuff to make the mod a success. _________________ http://twitter.com/HQ_Shark2th
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Wed Mar 08, 2006 3:17 pm Post subject:
Once again I find myself in the awkward situation of having to agree with Shark2th. The Xenium has never failed me, but I too am biased. Damnit Shark!!! _________________
slimmk3 Xbox-HQ Enthusiast
Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Feb 10, 2006 Posts: 40
Posted: Wed Mar 08, 2006 5:32 pm Post subject:
now the Xenium modchip that you have , its non-solder and how long did it take to install , im going to read a bit about it just like i did with softmodding so i cangett a better idea of what they actually do.
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Wed Mar 08, 2006 6:15 pm Post subject:
Using the solderless mount, I'd recommend about 45 minutes from cracking the first screw to tightening the last.
Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Feb 10, 2006 Posts: 40
Posted: Wed Mar 08, 2006 7:15 pm Post subject:
i read up on some modchips and talked about it with my brother and i think i found one for me. im definetely not soldering anything so the solderless mount is a must! i was look at the Xenium Ice Xodus modchip.
it comes with the solderless mount , the external leds , pin header install ,the wire loom for the power , and a usb socket. im no expert on modding but is this a good choice??? the site's link is here:
Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Feb 10, 2006 Posts: 40
Posted: Wed Mar 08, 2006 7:20 pm Post subject: or this modchip also solderless
i also checked out this one the Xecuter 2.6 CE (solderless)
i looked at my xbox and again i have the 1.0 so i found exactly where its supposed to go so im figuring this would be a simple install. so tell what u think. heres the link:
T-Rizzle Xbox-HQ Freak Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Wed Mar 08, 2006 7:27 pm Post subject:
I'm pretty biased myself, but it's towards the Xecuter brand. If you do go xecuter, I'd go with an Xecuter 3 CE chip, I have one of those and have installed many into various other boxes without any problems. But that's just me. With a 1.0 box, solderless install is a breeze. _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
slimmk3 Xbox-HQ Enthusiast
Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Feb 10, 2006 Posts: 40
Posted: Wed Mar 08, 2006 7:41 pm Post subject: i made my choice
i think i have my mind made up. im ging with the Xecuter 3 CE. i read up about it and looked at some schmatics on installation. its simple to install , no soldering and it looks good. one thing i don't get is the green and red light , protect/unprotected thing. what does that mean?
x3ce_final-5.jpg
Description:
Filesize:
60.51 KB
Viewed:
0 Time(s)
T-Rizzle Xbox-HQ Freak Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Wed Mar 08, 2006 8:04 pm Post subject:
Protected modes mean when it's able to be flashed by a hacked bios. It will come pre-flashed with a legal bios. With the X3 C3, you can flash via HTTP, which ROCKS! But basically it is just an indicator which mode it's in. Protected (can't be flashed) Un-protected (can be flashed). Get the drift? Hope that helps! _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
slimmk3 Xbox-HQ Enthusiast
Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Feb 10, 2006 Posts: 40
Posted: Wed Mar 08, 2006 8:22 pm Post subject:
so what site did u purchase u modchip fromcuz i looked on modchipman.com and the xecuter 3 ce was 79.99 including the solderless adapter. but then i checked on another site and the xecuter ce was like 34 bucks and the the xapter was only 15 bucks. what site did u use that had reasonable prices and it shipped in less than a week??
T-Rizzle Xbox-HQ Freak Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Wed Mar 08, 2006 8:27 pm Post subject:
I got mine from http://www.extreme-mods.com I even got the X3 Control Panel with it and it all shipped in less than a week and actually arrived in less than a week. Great service too! _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
slimmk3 Xbox-HQ Enthusiast
Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
i think its a different country and i live in new jersey.
the price for the xecuter 2.6 ce and the xapter is less than 30 bucks.
is that safe??? check the site out for me and let me know what u think
T-Rizzle Xbox-HQ Freak Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Wed Mar 08, 2006 8:31 pm Post subject:
Yeah, it's UK, I wouldn't order from it cause shipping will be a bit more expensive. I'd stick with www.extreme-mods.com _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
slimmk3 Xbox-HQ Enthusiast
Xbox Version: v.1.0 Xbox Medi Modded: xecuter 2.6 CE 120 gb WD
Joined: Feb 10, 2006 Posts: 40
Posted: Wed Mar 08, 2006 8:40 pm Post subject:
iight i looked on the site. im going with Xecuter 2.6 Ce with the solderless adapter. price of them together is like 54 bucks. thats reasonable for me so im going with that. i know shipping and handling is gonna cost me a lil bit but thats fine. so is there anything else that i have to get or that i should get??? and if i order them together will it be one shipment?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum