Posted: Fri Feb 17, 2006 2:03 am Post subject: Trying to boot from AID - how to boot from disc and not OS?
Hello everyone,
I was interested in trying the AID autoinstaller to put a few apps on my inherited Xbox, but I am not sure how to get it to boot from the DVD-ROM and not directly into the Xenium OS 2.3.0.
Any ideas or tips would be greatly appreciated!
Cheers,
Tom
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Fri Feb 17, 2006 3:16 am Post subject:
Turn on your xbox and go to the xenium 2.3.0 screen....from there put your aid disc in the drive....then from the xenium screen load your hacked bios....if you have a hacked bios other than the retail one that works it should load by itself...later. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
gust0208 Xbox-HQ Newbie
Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Feb 16, 2006 Posts: 9
Posted: Fri Feb 17, 2006 3:22 am Post subject:
Hello,
Thanks for the reply. When I go to the launch menu, my choices are evox and the retail bios. Do I need to install a hacked bios here in order to boot the AID disc? I just inherited this Xbox and am on the learning curve for all of the modchip/bios/dashboard tech.
I thought that the chip had been flashed with the xenium 2.3.0 bios since I am seeing the xenium 2.3.0 OS screen? Is it a possibility that my DVD-ROM may be faulty since I am unable to view contents of the DVD in boxplorer and unable to view DVD movies? I don't have an xbox game yet to test that.
Cheers,
Tom
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Fri Feb 17, 2006 3:28 am Post subject:
Go into your launch menu and hit evox with aid in the drive and let me know if that works for you...later. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
gust0208 Xbox-HQ Newbie
Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Feb 16, 2006 Posts: 9
Posted: Fri Feb 17, 2006 1:30 pm Post subject:
yoshie1 wrote:
Go into your launch menu and hit evox with aid in the drive and let me know if that works for you...later.
Hey, without the disc in the drive, the system works perfectly. Boots to Xenium OS, can launch into Evox, can use content on the hard drive and launch other programs. But, with the disc in the drive, I can turn on the system, get to the Xenium OS, launch evox and then it does the evox load screen with the green blob and then goes to a black screen and appears to hang. I let it set for a few minutes with no change.
I ask about the drive since I have not been able to play DVD movies from it and when I opened the case, my friend had pinched the IDE cable running from the DVD drive to the hard drive with one of the torx screws. I bought a new cable and will replace it, but I am suspect of the drive.
Thanks again for helping a new newbie.
Cheers,
Tom
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum