Posted: Thu Dec 15, 2005 6:41 pm Post subject: Just bought a modded xbox , And im an idiot
Hi can anybody help me to find all the specs of my new xbox ,
I know it has EVOX and AVALAUNCH and most all the other progs that normally come DVD2XBOX etc but how do i find out what chip is installed ?
And also can i update the bios via a burned cd or do i have to connect to a pc
Sorry for the complete lack of knowledge !!
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Thu Dec 15, 2005 6:58 pm Post subject:
The only two ways your find out what's in the box is to either open it, or contact the seller. If you are real luck, the Avalaunch or Evox might identify the bios, but that's about it. _________________ http://twitter.com/HQ_Shark2th
gpax Xbox-HQ Enthusiast
Joined: Dec 11, 2005 Posts: 20
Posted: Thu Dec 15, 2005 7:32 pm Post subject:
no ,EVOX or AVALAUNCH doesnt identify the bios but thanks for your help
slick_j_2002 V.I.P. Lifetime
Joined: Oct 29, 2004 Posts: 273
Posted: Thu Dec 15, 2005 7:47 pm Post subject:
Openning the system is really easy. If you follow the first steps of this tutorial, you'll be able to see where the chip is.
If you can't identify it by looks, you can take a picture of it and post it here, and one of us will be able to identify it for you.
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Ugh, that's what always made me not order premods from people I don't know really well. They can charge you $60 for an X3, plus the installation, and then end up softmodding the thing...
Gpax, I noticed that you have Xenium ICE set as your chip. Is this what you ordered, or what you just assumed to be in there?
gpax Xbox-HQ Enthusiast
Joined: Dec 11, 2005 Posts: 20
Posted: Thu Dec 15, 2005 11:23 pm Post subject:
Is there a way of seeing if it isi softmodded without opening the xbox ?
if not il just have to open the thing up and stick a pic on here
jhondra V.I.P. Member
Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Fri Dec 16, 2005 12:03 am Post subject:
Well, a good hint that it is a softmod is if it hasn't been opened up before (grin). Is the sticker ripped/cut to get to that 6th screw on the bottom? How about the rubber feet (though those can be stuck back on).
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
gpax Xbox-HQ Enthusiast
Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Dec 11, 2005 Posts: 20
Posted: Fri Dec 16, 2005 12:22 am Post subject:
its definately been opened as it has a 120gb hdd inside
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Fri Dec 16, 2005 12:25 am Post subject:
then open it up and look it already has a voided warrenty course you need the screwdrivers fo rit but they should only set you back like $2
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Fri Dec 16, 2005 2:09 pm Post subject:
Just a nudge about the indications on the forums under peoples avatars.
Some are putting Xeniums by default. It's a minor bug in the forums that forahobby will be working on.
Xbox Version: Xbox V1.0
Modded: Xecuter2.6 CE
You would see that all users will show a V1.0 and a chip of some kind. Currently appears to default to Xecuter. HA!
It changes from time to time. _________________ http://twitter.com/HQ_Shark2th
3weezE Xbox-HQ Elite Member
Xbox Version: 1.5 / 1.6b Modded: Xecuter3 CE
Joined: Nov 04, 2004 Posts: 228 Location: driving a Mongoose!
Posted: Fri Dec 16, 2005 5:16 pm Post subject:
gpax you'll need two Torx screwdrivers to open up your box and remove the drives. You can get them at Sears or any hardware store .
T-20 for the case screws (6 screws)
T-10 for removing the drives (3 screws) _________________ [XBOX v1.6b / Xecuter 3 CE / Western Digital Caviar SE 300GB HD / ATA166 IDE Cable / XCM Cystal Clear Case / Red Firework LED 80mm Fan / 12v Fan Mod / UnleashX Default Dash]
[Premium XBOX 360 Owner]
gpax Xbox-HQ Enthusiast
Xbox Version: 1.5 / 1.6b Modded: Xecuter3 CE
Joined: Dec 11, 2005 Posts: 20
Posted: Fri Dec 16, 2005 11:53 pm Post subject:
ok , thanx for the torx sizes
And i do know that i definately has a chip and not softmodded because it has the switches on the front of the xbox
Rabid1 V.I.P. Lifetime Xbox Version: !.6, 1.4 Modded: Xenium
Joined: Nov 07, 2004 Posts: 233 Location: Reno Nevada
Posted: Sat Dec 17, 2005 1:44 am Post subject:
What happens when you boot up? Does it go straight to a dash? Try powering on with the eject button, see any special screens? Any external dip switches? _________________ 1.6b, Xenium !ce OS 2.3.0, External 160g WD, External 250g Seagate, Double blade UFO Fan over Jewel
1.4 Xenium Ice OS 2.3.0, 300g WD
jhondra V.I.P. Member
Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Tue Dec 20, 2005 4:55 pm Post subject:
You can try booting to a BIOS screen. Assume it is a chip and try all the various things. Like hold white button down on a controller while booting and see if it boots to an Xecuter Config Live Bios screen. What does the external switch look like (picture)? Probably can ID it from that...
You can't check with whomever you got it from?
I'd recommend just opening it up and figure out for sure once and for all.
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum