but if Bios Checker shows 2x 512 bioses unknown, and 4x 256 bioses, that means it will work with 512kb bios? or does bios checker always show these amounts of fields?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Fri Oct 26, 2007 12:05 am Post subject:
The 5035 will work if its an X-2 chip use that its the bios i run and get the x-2 config app if you want to tweak the look of your boot screens a little.
but because it says Xecuter2 underneath Xbox logo on boot,
we assumed its that, but I've read in another thread that
someone with an Aladin Xt also gets Xecutor2 underneath Xbox logo...
flashed it with 256kb 4983.06 bios, no difference, I'll try reinstalling EvoX dash on C ...
or because no X2 config file?
the funny thing is, there was a EvoX dash on it, which worked,
but everything was outdated (from 2003), so we thought about a clean install... wow, no luck there
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Fri Oct 26, 2007 12:49 am Post subject:
if your getting the X-2 boot screen then it shopuld be working fine.
still the same: Xbox logo shows (with Xecutor2 written below), tries to boot I think, but only for a second there's a black screen and xbox reboots again, over and over, isn't able to load dash..........
I've always seen the Xbox boot screen with Xecutor2 instead of Microsoft underneath, and I've tried One-click install, and EvoX dash to C, but nothing boots (haven't reinstalled it with new bios, cause bios checker is now showing the bios version, before it said all bios unknown)
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Fri Oct 26, 2007 1:17 am Post subject:
Use the one click install and make sure its not for a soft mod and it should work out.
don't know why it works now, maybe cause installed One-click boot after I updated Bios (cause Bios Checker did not recognize any Bios, all unknown), or because I installed it from AID4.12 (not Lite, with DHCP and Bios pack),
but XBMC does not boot: unable to find skin or keymap.xml
giving me a hard time, again...
Update:
fixed it: Copied UserData from Xbins version via FlashFXP,
working fine now
now that it's running fine, not going to do anything risky
that 1mb flash must not have been successful after all:
I've checked and it says (256)4981.06,
while I recall havin' done 1mb 4983.06,
so I did 256kb 4983.06, and now it's actually that version,
my guess is it's Aladdin modchip, cause the plate is red, and no other modchips seem to have red plate (but maybe that's variable, dont know),
the hard drive seems to be only 7631mb big when I check system info with XBMC, can that be? or might the F drive not be prepared properly (should be /and probably is/ disabled since its retail hdd?)?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum