Posted: Fri Jun 08, 2007 6:13 pm Post subject: Light alert after Softmodding my XBOX
HI!
I have a XBOX 1.00 and i buy a 80 GB seagate disk, where i softmod it whit the AID 4.01 and SID5.1 and install Evox
The thing is that after modding my X, i can play save games in the disk, its boot perfectly, but i see the lights in the eject boton flashing
Its a Fast Flashing red Orange and Green light, after i check the configuration of the evox i see that it was enabled the G: drive and i dont configure that drive, so i disable the drive G: and i get only an static orange light. I search almost everyplace to know about this kind of error but no luck
I shut down the X and when i turn on again i have the same flashing lights alerts red orange and green, i go to the config but G; was disabled!!!!!!!!
Can Someone tell me what is wrong whit my X
FinalCloud Moderator
Joined: Nov 03, 2006 Posts: 2283 Location: Plymouth, UK
Posted: Sat Jun 09, 2007 1:07 pm Post subject:
Nothing is wrong with your Xbox. The lights are set to cycle like that on purpose after the softmod. It happens with every softmod.
I wouldn't worry about it, its not saying you've got an error, its just a cool little flash!
I believe the line it relates to in the .ini file is:
ChameleonLed = 15
Although, what you would change that to, I don't know.
one more thing,
the chameleonLed = 15
this refers to the blue LED on a chameleon mod chip, not the actual xbox led,
the values are as such :
0 = OFF
1 = ON
2-100 = Flashing (blinking) _________________
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Thu Jul 12, 2007 2:01 pm Post subject:
FinalCloud wrote:
It happens with every softmod.
FC
ive softmodded many an xbox...and havent seen that once....i saw it when i went in my xbmc and set it to cycle....but never simply from softmodding.... _________________
FinalCloud Moderator
Joined: Nov 03, 2006 Posts: 2283 Location: Plymouth, UK
Posted: Thu Jul 12, 2007 2:04 pm Post subject:
It always happens to me, it even happened on mine. But the light just stayed green on its own in the end, I think?! So long ago now I can't remember.
@ cabbot,
what softmod exploit are u using ?
i noticed when i used krazie ndure upon reboot all i got was a constant green LED, but, when i used the SID exploit it booted up with the green/red flashing that FC mentions _________________
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Fri Jul 13, 2007 12:29 am Post subject:
i use sid....they always boot green...but when softmods active its red.....no flashing though.... _________________
FinalCloud Moderator
Joined: Nov 03, 2006 Posts: 2283 Location: Plymouth, UK
Posted: Fri Jul 13, 2007 7:36 am Post subject:
Every time I mod using SID, I always get the cycling lights. If I recall, its happened on every box I've modded. Might be something loaded into SID or one of the settings used during the install.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum