Posted: Mon Jul 23, 2007 10:10 pm Post subject: scrolling screen and in black and white.
So there I was happily playing my modded xbox with the X3 CE chip with UnleashX as a dashboard until the 360 came out and I moved. Then my unmodded 360 went down while it has been sent to microsoft for repairs I decided to pull the old box out. As of right now I can't get the chip to boot at all except for when I first pulled it out of the closet. I let a couple of kids play on it and now when I try to boot with the chip the box turns it self on and off three times then it frags red and green. If I try boot with the chip disable the screen starts to scroll if the tray is empty. If there is a game in the tray it will play but in all conditions the screen is in black and white even on different TV's. I thought of reflashing the chip but with the screen so distorted I can't get to the page I need to get the IP address of the Box. I'm not sure what to do from this point. Can anyway help.
boobs Xbox-HQ Elite Member
Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Dec 13, 2005 Posts: 303 Location: Australia N.S.W
Posted: Tue Jul 24, 2007 6:56 am Post subject:
I let a couple of kids play on it and now when I try to boot with the chip the box turns it self on and off three times then it frags
something you did not tell as over at team xecuter
check your bios switch on on off off or off on off off
boot into x3 config once in there do this
quick button combo to set to ntsc: left trigger + X
quick button combo to set to pal: left trigger + Y
the xbox will reboot to that setting
ok get Enigmah NTSC-PAL Video Switcher put it on to a cd-rw or dvd-r with dummy file make it in to a iso file burn then boot xbox with it in when you think it has bootup push ever A for pal B for ntsc then reboot xbox with out it in dvd drive
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Tue Jul 24, 2007 12:56 pm Post subject:
Dont you love it when thay post in 2 or more forums and you get to help them twice on the same subject boobs?
slobkilla Xbox-HQ User
Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Sep 02, 2005 Posts: 13
Posted: Wed Jul 25, 2007 4:07 am Post subject:
boobs wrote:
I let a couple of kids play on it and now when I try to boot with the chip the box turns it self on and off three times then it frags
something you did not tell as over at team xecuter
check your bios switch on on off off or off on off off
boot into x3 config once in there do this
quick button combo to set to ntsc: left trigger + X
quick button combo to set to pal: left trigger + Y
the xbox will reboot to that setting
ok get Enigmah NTSC-PAL Video Switcher put it on to a cd-rw or dvd-r with dummy file make it in to a iso file burn then boot xbox with it in when you think it has bootup push ever A for pal B for ntsc then reboot xbox with out it in dvd drive
If I can not boot to the chip at all then how can I get to X3 config?
boobs Xbox-HQ Elite Member
Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Dec 13, 2005 Posts: 303 Location: Australia N.S.W
Posted: Wed Jul 25, 2007 6:40 am Post subject:
if you can,t boot your chip then it a bios problem or a install problem
if you try switch settings and still cannot boot into x3 bios config (hold white button on controller till you see x3config) then its a install problem were the kid moving the switchs or were they jumping up and down move or hitting xbox
slobkilla Xbox-HQ User
Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Sep 02, 2005 Posts: 13
Posted: Wed Jul 25, 2007 3:13 pm Post subject:
As far as I know they were most likely playing with switches. I have moved twice since it was installed so I'll pull the MB off and take a look at things on the underside. By the way I also tried pulling the chip out and still get the same thing with the black and white screen.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Wed Jul 25, 2007 4:49 pm Post subject:
Just thinking have you hooked it up with a diffrent set of AV cables?
boobs Xbox-HQ Elite Member
Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Dec 13, 2005 Posts: 303 Location: Australia N.S.W
Posted: Wed Jul 25, 2007 7:53 pm Post subject:
were most likely playing with switches
try chip without x3 bios switch pluged in
slobkilla Xbox-HQ User
Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Sep 02, 2005 Posts: 13
Posted: Wed Jul 25, 2007 8:34 pm Post subject:
wes213 wrote:
Just thinking have you hooked it up with a diffrent set of AV cables?
I have, but with only two. I have an additional 3 that I will try as well
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Wed Jul 25, 2007 8:36 pm Post subject:
If you did this then it might not help to try more but then again you never know.
madmoyers Xbox-HQ Member
Xbox Version: 1.1,1.3 Modded: x2ce lite,x3 xbmc
Joined: Nov 13, 2007 Posts: 99 Location: hinton va
Posted: Wed Nov 14, 2007 8:01 am Post subject:
take the cover off and check the chip,make sure it is seated firmly on the pinheader i have had similer boot problems before _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum