Posted: Thu Jul 21, 2005 10:49 pm Post subject: Softmod Installer with Splinter Cell Black Screen
Need some help please; I have one mod chipped Xbox and one unmoded Xbox Kernel: 1.00.5830.01 copied the contents of SID3.Splinter.Cell.Part1.Xbox-Hq and also copied
SID3.Splinter.Cell.Part2.NTSC.Xbox-Hq to moded Xbox saved files to hard drive then to memory card then transferred files from memory card to unmoded Xbox and every thing looks good. Put the original Splinter Cell in unmoded Xbox and in save games I can see Linux when it tries to boot in to it I just get a black screen and the power light stays green and nothing happens but when I put the original Splinter Cell in the moded and do the exact same thing I get he load screen for the soft mod and the power light goes red and I can go through all the setup step with no problems and it work just fine.
dprules Xbox-HQ Elite Member Xbox Version: v1.0 Modded: xenium ice + U.S.A.
Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Fri Jul 22, 2005 12:34 am Post subject:
try putting the saves on it again maybe it will work.also what kind of memory card are you using? and the splinter cell you are using is it the platnum edition or the original? _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Fri Jul 22, 2005 5:39 am Post subject: Re: Softmod Installer with Splinter Cell Black Screen
breye wrote:
Need some help please; I have one mod chipped Xbox and one unmoded Xbox Kernel: 1.00.5830.01 copied the contents of SID3.Splinter.Cell.Part1.Xbox-Hq and also copied
SID3.Splinter.Cell.Part2.NTSC.Xbox-Hq to moded Xbox saved files to hard drive then to memory card then transferred files from memory card to unmoded Xbox and every thing looks good. Put the original Splinter Cell in unmoded Xbox and in save games I can see Linux when it tries to boot in to it I just get a black screen and the power light stays green and nothing happens but when I put the original Splinter Cell in the moded and do the exact same thing I get he load screen for the soft mod and the power light goes red and I can go through all the setup step with no problems and it work just fine.
One of two things possibly
* Bad Original of Splinter Cell (not usually but can happen)
* Bad Memory Card (usually the most common)
Grab yourself an official xbox memory card and try that. Or, alternitavely get a Mega X-Key which stores 4 normal memory cards in one nice little USB device (so you just plug it into the PC and transfer the saves with the software provided).
Thanks for replays, and yes it is the original Splinter Cell not platinum edition
And the memory card is an official Xbox memory card. I’ll try to find a 007 Agent Under Fire original and see if it will work with that or just might put a mod chip in it.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 11,035 | 
Guests: 1746 | 
Members: 1 
Forums 
