Xbox Version: Xbox V1.0 & 1.1 Modded: Xecuter 2.3 and SmartXX2
Joined: Oct 30, 2004 Posts: 4
Posted: Sat Nov 06, 2004 4:37 am Post subject: LAD2 Solder problems. Need assistance
OK I hope I didn't hose my box... (I know, not a good way to start a question) I am installing a new SmartXX V2 on a 1.6 Xbox. I am rebuilding the LPC. I got all of the wires soldered just fine except for the on that goes to LAD2. I didn't realize that it was a surface mount (i.e. it doesn't have a small hole to stick the wire into like the other mounts.) Now the solder at that point has been removed. I can't seem to get any solder to stick at that point. How do I rebuild it? If you look at this link http://www.teamxecuter.com/x3/tutorials/x3pin16.htm you can see the point I am talking about. It is the Red connection with the open circle for LAD2. Thanks for the help!! Bikeswine
TheModGod Xbox-Hq Legendary Xbox Version: Xbox V1.0 & 1.1 Modded: Xecuter 2.3 and SmartXX2
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sat Nov 06, 2004 4:49 am Post subject:
There should still be a point to solder to even if you desoldered your original try.
Are you saying that there is absolutely nothing left on the board? What I usually do is use a 25watt iron and place it on the spot for about three seconds and then touch some .022 solder to it. It usually puts a nice little bead of solder on the area.
Then, I tin the wire with a little solder and place the wire on the bead of solder. I then proceed to touch the wire as its laying on the bead of solder and it sucks right into it.
Let me know if you need more help, I'll see what I can do. Can you take a pic of the point and post it?
later man
realmccloy
----------------------------
http://www.xbox-hq.com http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
BikeSwine Xbox-HQ Newbie
Xbox Version: Xbox V1.0 & 1.1 Modded: Xecuter 2.3 and SmartXX2
Joined: Oct 30, 2004 Posts: 4
Posted: Sat Nov 06, 2004 5:51 am Post subject: Photo of botched job.
Boy I miss my 1.1 box. I modded it no problem.....
Heres the photo of my mess in progress.
LAD2 smallest marked.jpg
Description:
Filesize:
81.74 KB
Viewed:
424 Time(s)
tristan792 Xbox-HQ Newbie
Xbox Version: Xbox V1.0 & 1.1 Modded: Xecuter 2.3 and SmartXX2
Joined: Dec 12, 2004 Posts: 1
Posted: Sun Dec 12, 2004 8:29 am Post subject:
i did the same thing. did you ever fix this and if so how/ seems like a somewhat popular thing to do.
custom-xmodz Xbox-HQ Freak
Joined: Aug 28, 2004 Posts: 796 Location: Wales, UK
Posted: Sun Dec 12, 2004 8:20 pm Post subject:
Hiya
it looks like you have ripped the pad off, does your xbox boot?
I would be suprised if it did, you could well have a dead mobo.
it's fixable tho, get down to auto store and buy some heated rear windscreen repair paint (conductive paint), you can also buy pens that do the same thing.
Sand down each end of the track until you can see the shinyness of metal a fair bit and join using the paint, let it dry and test for continuity. I would not like to try soldering to it tho so you will need to find another point (follow the track until you find another point, if you pass through a component on your way then try the other direction)
DJH
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum