Posted: Thu Nov 30, 2006 7:30 am Post subject: Xecuter 3 CE FRAGging
I just installed the Xecuter 3 CE (soldered) in my v1.0 Xbox because the TSOP got a bad flash.
When I turn on my Xbox, it shuts itself off twice then the front LED blinks red and green and the TV remains black, just like after the TSOP was flashed with a bad BIOS. The X logo on the external swtch is solid red and the HDD light on it is solid blue. The LED on the X3 chip itself is red or green depending on what I set the flash protect switch to.
I've tried various combos of switch settings on the X3 chip and the external switch, but always with the same result.
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Thu Nov 30, 2006 6:13 pm Post subject:
try booting to the back-up of the 3CE, tap or hold the power and eject at the same time.. if the front of the switch controller goes to red... its not activated, it should be blue when its activated... did you buy this new??
Glass Xbox-HQ Newbie
Xbox Version: 1.0 Modded: Xecuter3 CE
Joined: Nov 12, 2006 Posts: 9
Posted: Thu Nov 30, 2006 7:36 pm Post subject:
I tried booting that way too, but it still frags. Yes, I bought it brand new from mod-chip.com
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Fri Dec 01, 2006 5:58 am Post subject:
what adapter are you using? or is it soldered??
Glass Xbox-HQ Newbie
Xbox Version: 1.0 Modded: Xecuter3 CE
Joined: Nov 12, 2006 Posts: 9
Posted: Fri Dec 01, 2006 9:45 pm Post subject:
It is soldered.
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Sat Dec 02, 2006 2:58 am Post subject:
two things... make sure your D0 point is right.. thats what tells the motherboard to check for the new bios in the chip, and make sure there wasn't any solder splashes...
Glass Xbox-HQ Newbie
Xbox Version: 1.0 Modded: Xecuter3 CE
Joined: Nov 12, 2006 Posts: 9
Posted: Sat Dec 02, 2006 3:13 am Post subject:
Progress! I resoldered the pin header and D0 wire, and now the X logo on the external switch is solid blue and the Xbox does not FRAG but stays solid green, however, the HD light on the external switch is no longer solid blue, and the TV screen stays black. What next?
Glass Xbox-HQ Newbie
Xbox Version: 1.0 Modded: Xecuter3 CE
Joined: Nov 12, 2006 Posts: 9
Posted: Sat Dec 02, 2006 3:26 am Post subject:
A couple extra notes. I noticed when I turn the console on, the HD light on the external switch does light solid blue for a few seconds then goes out. Previously it would stay lit indefinitely. At least the X logo stays lit solid blue though.
Also, if I press the eject button, the Xbox LED blinks green forever and the DVD tray never actually opens.
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Sat Dec 02, 2006 8:03 am Post subject:
Do you have it connected between the mobo and the p/e board?
can you try booting to the emergency bios now?
What happens if you hold the white buttom while booting? _________________
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Mon Dec 04, 2006 3:31 am Post subject:
to boot to the emergency bios you have have to tap both eject and power at the exact same time...
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum