There's no sense in not trying if it might work, now is there =P
Eddie _________________ Xbox 1.6
SID 4.5 - MechAssault Exploit
Retail Seagate 10 GB HD
EvolutionX 3935
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 07, 2006 3:48 pm Post subject:
Chances are your dvd drive laser needs replaced or replace the drive itself _________________
Denilsinho Xbox-HQ Member Xbox Version: Xbox V1.0, V1.6 Modded:
Joined: Jan 12, 2006 Posts: 83
Posted: Wed Mar 08, 2006 3:46 am Post subject:
Whats =p, i'm going to try cleaning the lens first though, if that doesn't work that box is doom, reason there aren't stores here that sells these things and I don't have a credit card. It's hard on me, and I'm still going college. I really hope the lens needs cleaning and cleaning only.
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Wed Mar 08, 2006 4:18 am Post subject:
get a can of air to blow out the dust too. _________________
Denilsinho Xbox-HQ Member Xbox Version: Xbox V1.0, V1.6 Modded:
Joined: Jan 12, 2006 Posts: 83
Posted: Wed Mar 08, 2006 4:53 am Post subject:
yeah those compressed air, should work fine. Going to try tm. I hope that helps. The AID3 download is at 79.3% Can't wait until it finish. I was looking on XBMC looks like a pretty good dash to use as well as app. What would u recommend as dash? which comes in AID3?
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Wed Mar 08, 2006 5:00 am Post subject:
I would use UnleashX. _________________
Denilsinho Xbox-HQ Member Xbox Version: Xbox V1.0, V1.6 Modded:
Joined: Jan 12, 2006 Posts: 83
Posted: Wed Mar 08, 2006 5:17 am Post subject:
wats the differnce in both dashes?
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Wed Mar 08, 2006 10:58 pm Post subject:
UnleashX is a good dash for one and use XBMC as an app you will have alot of flexablility. _________________
Denilsinho Xbox-HQ Member Xbox Version: Xbox V1.0, V1.6 Modded:
Joined: Jan 12, 2006 Posts: 83
Posted: Thu Mar 09, 2006 1:10 am Post subject:
hey wats up. i have a problem. the controller cable as five wires--> red, brown, white, yellow and blue. my usb cable as four-->black, red,white and green. The thing is i don't know which one to connect which one to. eg. red -red, white - white etc. I want to know which connect to which?
LEE337 Xbox-HQ Freak Xbox Version: Xbox V1.0, V1.6 Modded:
Joined: Dec 01, 2005 Posts: 540 Location: Somewhere south of Seattle
Posted: Thu Mar 09, 2006 1:38 am Post subject:
Denilsinho wrote:
hey wats up. i have a problem. the controller cable as five wires--> red, brown, white, yellow and blue. my usb cable as four-->black, red,white and green. The thing is i don't know which one to connect which one to. eg. red -red, white - white etc. I want to know which connect to which?
OK, (Sigh) Here goes.
You will need a multimeter to verify these wires go to the correct pins
The outside wires are +5vdc( red) and ground. (Brown?)
The yellow wire is not used(for this)
White and green on your USB should be data -(white) and data + (I think that you need to match up the blue and the green)
If you get the databackwards, it just won't work. If you put +5vdc to one of the data lines, you could get smoke! So, double check every wire with the multimeter! (Ohms setting, connector pin to wire.)
Remember... this is YOUR Xbox, not mine!
So, have fun! _________________ I think I like fixing Boxes more than using them!
Naaaah!
-Lee
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Thu Mar 09, 2006 1:54 am Post subject:
The wires are that color, you have got to be joking, is this controller a 3rd party controller. But i think i might have figured it out but dont hold me responsible if it dont work, ok heres the match up,
Red -> Red Brown -> Green
White -> White
Blue -> Black Yellow -> leave as is connected unless you cut it just put it back together and tape it up. _________________
Denilsinho Xbox-HQ Member Xbox Version: Xbox V1.0, V1.6 Modded:
Joined: Jan 12, 2006 Posts: 83
Posted: Thu Mar 09, 2006 4:12 am Post subject:
i had it all figured out. I tried using blue to green, red to red, yellow is left out and brown to black, white to white. worked like a charm. It told me that it has erased the disk because its not valid, which was what we wanted right?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,856 | 
Guests: 1582 | 
Members: 1 
Forums 
You will need a multimeter to verify these wires go to the correct pins 
If you put +5vdc to one of the data lines, you could get smoke! So, double check every wire with the multimeter! (Ohms setting, connector pin to wire.)
Remember... this is YOUR Xbox, not mine! 
I think I like fixing Boxes more than using them! 
