Do u know any reason why im not geting a blue screen? Would it have anything to do with having v1.6?
SUPERMAN08012 V.I.P. Lifetime Xbox Version: 1.6 PORTABLE Modded: XENIUM
Joined: May 08, 2004 Posts: 234 Location: NJ, USA
Posted: Tue Nov 08, 2005 12:22 am Post subject:
Your chip is capable of flashing through http. You should be able to access the xbox ip through chip interface. Is that where your getting the ip info? Or are you looking through your pc settings? Dont assume the ip of the xbox. I have made same mistake in past. First step into flashing this way is to confirm correct address. You should without an issue be able to type the ip in IE browser window and bring up chips interface. You will see a blank page if no connection is available..... or eternal "loading" blank screen. The only 2 easons for not getting blue chip screen on boot would be 1:improper install or 2:faulty chip/flash. I would first verify install very carefuly. If improperly installed, pray you didnt fry the chip. If it is in fact installed to 1.6 specs I might suspect chip/fact flash integrity.
And to answer your question of anything to do with 1.6.... It is a bit diff install. did you go with specific 1.6 directions?
MACCZ Xbox-HQ User Xbox Version: 1.6 PORTABLE Modded: XENIUM
Joined: Aug 30, 2005 Posts: 10
Posted: Tue Nov 08, 2005 3:05 am Post subject:
Thanks for the help I will run over how I installed it and see If I made a mistakes. If I did fry the chip I have a backup X2.6 chip i will install and see If I have any luck. Thanks
boxy Xbox-HQ User Xbox Version: xbov v1.0 +v1.6 Modded: executer 2.6
Joined: Dec 20, 2004 Posts: 19
Posted: Tue Nov 08, 2005 9:50 am Post subject:
Have you done the lpc rebuild as i think this is necessary on a 1.6 box,do you have any lights on the chip or control module ( bank select,chip on off).
MACCZ Xbox-HQ User Xbox Version: xbov v1.0 +v1.6 Modded: executer 2.6
Joined: Aug 30, 2005 Posts: 10
Posted: Sat Nov 12, 2005 7:29 am Post subject:
Yes there are lights on the chip and it seems like i have it installed right, but for some reason the chip is not reading the information that supposed to be on it.
jhondra V.I.P. Member Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Sun Nov 13, 2005 3:19 pm Post subject:
So, let me get this straight. You can NOT boot your xbox to a blue FLASH BIOS screen? there are instructions on this at Team Xecuter's page. If that doesn't get you going, then something is wrong. I would expect you should be able to do this if you set your boot to bank 2 for SURE. But maybe you've uploaded a bad 1MB Bios (you should ONLY flash 512KB bios' on that chip), which would have wiped out your backup bios...
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
MACCZ Xbox-HQ User Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Aug 30, 2005 Posts: 10
Posted: Tue Nov 22, 2005 5:26 pm Post subject:
I ran the install process and i found that both the chips i ordered from two different places did not come with an Reset eject adapter or cable that shows i need for the proper install do i need these?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 19,415 | 
Guests: 5314 | 
Members: 0 
Forums 
