Joined: Jun 16, 2005 Posts: 226 Location: porterville california
Posted: Fri Jul 15, 2005 2:01 am Post subject: installing x3
ok i want to install a X3 modchip but when i looked on the tutorial on teamxecuter.com on how to install it on a v1.0-1.5. it showed the place where you put the pins in were like little holes but on my mobo all the holes you need to install the mod chip in were soldered up by the factory. so need to know how to install the chip thanxxx _________________ xbox v1.0
Xenium ICE + U.S.A.
Samsung 616T modified
160 western digital
XBMC, Avalaunch, UnleashX, MxM
Cantgetright Xbox-HQ Elite Member
Xbox Version: v1.3 Modded: Xecuter 3 CE
Joined: Feb 03, 2005 Posts: 256 Location: Jersey
Posted: Fri Jul 15, 2005 2:18 am Post subject:
The holes are filled with solder from the factory. You will need to either remove the solder with desolder braid or you could do a wire install. Personally would do the pin header install, but the wire install works well.
Here is a link to help with the desolder
http://www.kpsec.freeuk.com/solder.htm#desolder
Hope this helps. _________________ Xbox v1.3
x3ce modchip 3294/3108 Bios
250 hdd Western Digital
Ava Dash v49.3
Built w/HQ-AID v1.01
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum