Posted: Tue Feb 01, 2005 2:42 am Post subject: Eroor codes
Okay I'm about through with this. I have read just about every forum dealing with this set up...blah blah blah.
Anyways, I put the X-chip in my xbox. Soldered every point as I was supposed to. Someone suggested adding a little more solder, so I did. The lpc ports have plenty of solder on them...but not too much. The joints are very shiny. The chip is getting power. I get a FRAG. I've loaded the evox v1.3 which is a 4mb file to reload the entire Bios I assume. Then I loaded about four different bioses into the remaining slots. I made sure the 256 went in the 256 slots. I have loaded the M8+_16.bin a few variations of that, and some evox 1.1_1.6.bin. I cannot get past this FRAG error, and I have rechecked my soldering job. Does anyone have a different forum, different idea, different mod chip...anything that can help me out a little. I have already reordered a different mod chip, and I am going to try put that in a different machine. Hmm okay, if noone has any ideas could I borrow a boot please.
When booted from a Bios other than original, I get error code 16. When loaded with original I get 06. When I try to load a dashboard from CD I get a dashboard for a few seconds and then these particular error codes.
abo
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Tue Feb 01, 2005 4:48 am Post subject:
What HD do you have in the Xbox?
If you have a HD that you have not loaded dashboard on yet, that would explain your dash errors.
But, error code 06 means your eeprom data does not match the HD serial/password data and you have the wrong HD in the machine...
Typically, that is what that means.
I have also answered your other post. _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum