Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Posted: Sun Jul 23, 2006 7:00 am Post subject:
none f the hacked firmwar ewill work with any dlink, not a favorite of the firmware dev community, not the best of brands either _________________ Please post all PC Questions at PC-HQ.com
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Allnet ALL0277
Buffalo WHR-G54S
Buffalo WHR-HP-G54S
Buffalo WBR-G54
Buffalo WLA-G54
Buffalo WBR2-G54
Buffalo WBR2-G54S
Buffalo WZR-RS-G54
Belkin F5D7130/7330 (2mb flash)
Belkin F5D7230-4 v1444 (2mb flash)
Belkin F5D7230-4 v1000
ASUS WL500G-Deluxe
Motorola WR850G/GP --> see flashing notes below
Siemens Gigaset SE505 --> see flashing notes below
Ravo W54-RT --> see flashing notes for SE505 v1 (identical to SE505 v1)
Askey RT210W --> see flashing notes for SE505 v1 (identical to SE505 v1)
3.) Linksys WRT54G/GS (any version) flashing notes:
---------------------------------------------------
-For upgrading from the original Linksys firmware, please use the generic mini version (dd-wrt.vXX_mini_generic.bin) and flash it from the web GUI interface. After this first flashing you can change to any other distribution, if you want.
-For flashing via the web GUI interface, always use the included 'generic' binaries. The other Linksys router specific binaries are only meant for tftp upgrades.
4.) Motorola WR850G flashing notes:
-----------------------------------
-Just use the dd-wrt.v23_mini_moto.bin for initial flashing of the motorola device using the boot wait state.
-WARNING: Never, and I say never try to clear the nvram by the mtd utility. (mtd erase nvram). This will also delete your hardware MAC adresses which aren't stored in the CFE like in other routers.
-DD-WRT itself prevents this if a Motorola router is detected, but the commandline mtd utility can still brick your router in this case
5.) Siemens Gigaset SE505 Flashing notes:
---------------------------------
-For flashing the Siemens Gigaset SE505, you have to use the dd-wrt.v23_mini_generic.bin with boot tftp on 192.168.2.1
-Since the Siemens default settings do not fit to the Linksys/dd-wrt settings you must additionally check your configuration details after flashing. _________________ Please post all PC Questions at PC-HQ.com
j8994 Moderator
Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Posted: Sun Jul 23, 2006 7:38 am Post subject:
if it is a version 5 of the linksys wrt54g line then you have to build a adapter or i will mod it for you but it wont be free, as it is not the easiest thing, _________________ Please post all PC Questions at PC-HQ.com
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Posted: Sun Jul 23, 2006 8:20 am Post subject:
k none of the dlink routers can run the hacked firmware, you'll have to just get the software of get a linksys wrt54g _________________ Please post all PC Questions at PC-HQ.com
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
HQ Network: 9,856 | 
Guests: 2435 | 
Members: 0 
Forums 
