Posted: Thu Apr 21, 2005 3:55 am Post subject: The X3 Config Live BIOS
my box always boot into The X3 Config Live BIOS everytime i turn on my system even know i tell it to disable it everytime but it never holds my settings it is becoming a pain in my ass to do the setup eveytime i turn on my xbox. has anyone else had this problem?
my new setup is X3 chip, with the X3 control panel with the X3 2914 bios i will update this in my profile later _________________ XBOX v1.0:
Xecuter3 modchip with X3 Control Panel
Xecuter3 Bios v.2914
160GB Maxtor HDD
Avalaunch Dashboard
TheModGod Xbox-Hq Legendary Xbox Version: V1.0 Modded: Xecuter3
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Apr 21, 2005 3:45 pm Post subject:
I know I have seen this exact issue before in a forum...let me go see what I can dig up.
TheModGod
=============
http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
TheModGod Xbox-Hq Legendary Xbox Version: V1.0 Modded: Xecuter3
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Apr 21, 2005 3:50 pm Post subject:
Also, what I would try doing is maybe try reflashing the bios but this time with 3029 (newest bios)
I am still digging around forums, including ours and so far I haven't found the post that I saw. _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
kantraban Xbox-HQ Enthusiast Xbox Version: V1.0 Modded: Xecuter3
i already tried flashing the bios with 3029 and my box wouldnt run with that bios, i would turn it on and a second or two later it would just shut off for no reason so i put it back to 2914 cause that worked before maybe ill try it again and see what happens _________________ XBOX v1.0:
Xecuter3 modchip with X3 Control Panel
Xecuter3 Bios v.2914
160GB Maxtor HDD
Avalaunch Dashboard
kantraban Xbox-HQ Enthusiast Xbox Version: V1.0 Modded: Xecuter3
i just tried to flash my bios with 3029 and the new 3108 and they both do the same thing so im thinking they dont work right with xbox v. 1.0 cause it turns on for a second and shuts back down. has anyone else had this problem? sometime i wish i just stayed with the x-chip cause it was so userfriendly and bug free x3 is a pain in my ass and the x3control panel isnt made right either nothing fits right bad engeneering there! _________________ XBOX v1.0:
Xecuter3 modchip with X3 Control Panel
Xecuter3 Bios v.2914
160GB Maxtor HDD
Avalaunch Dashboard
TheModGod Xbox-Hq Legendary Xbox Version: V1.0 Modded: Xecuter3
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Fri Apr 22, 2005 1:03 am Post subject:
I have flashed 3029 to several 1.0's with no issues.
I have not gotten any responses from any other forums in regard to your issue though...
I'll keep digging though _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
kantraban Xbox-HQ Enthusiast Xbox Version: V1.0 Modded: Xecuter3
well then i wonder why 3029 doesnt work on mine? how did you have the 1.0 setup when u did it? _________________ XBOX v1.0:
Xecuter3 modchip with X3 Control Panel
Xecuter3 Bios v.2914
160GB Maxtor HDD
Avalaunch Dashboard
Cantgetright Xbox-HQ Elite Member Xbox Version: v1.3 Modded: Xecuter 3 CE
Joined: Feb 03, 2005 Posts: 256 Location: Jersey
Posted: Fri Apr 22, 2005 2:38 am Post subject:
I would check the solder or solderless adapter contacts on the number 15 and 16 holes of the Lpc. These two holes are used for the x3 live. _________________ Xbox v1.3
x3ce modchip 3294/3108 Bios
250 hdd Western Digital
Ava Dash v49.3
Built w/HQ-AID v1.01
Cantgetright Xbox-HQ Elite Member Xbox Version: v1.3 Modded: Xecuter 3 CE
Joined: Feb 03, 2005 Posts: 256 Location: Jersey
Posted: Fri Apr 22, 2005 2:56 am Post subject:
Sorry, the correct holes are 14 and 15. _________________ Xbox v1.3
x3ce modchip 3294/3108 Bios
250 hdd Western Digital
Ava Dash v49.3
Built w/HQ-AID v1.01
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,775 | 
Guests: 1236 | 
Members: 0 
Forums 
