Posted: Tue Sep 25, 2018 1:40 pm Post subject: Original System files location!?
Do anyone know where the factory language files are within the system, as what drive and where.
I'm trying to switch the language on a system from NTSC-J to NTSC-U.
The console is tsop'ed and chipped with a Duox3. Thanks for any help. Its greatly appreciated!
SPPV V.I.P. Lifetime
Joined: Sep 13, 2010 Posts: 2644 Location: Kamloops BC Canada
Posted: Wed Sep 26, 2018 1:01 pm Post subject:
The keyboard files are in xboxdashdata and can be opened with notepad. I would assume renaming keyboard to keyboard j would replace the japanese keyboard with english. As for actual language files there doesnt appear to be any and must be in the xbe itself.
Or you could try switching the flag on the XBOX from J to U with ConfigMagic and modifying the eeprom.
modder84 Xbox-HQ Member
Joined: Jul 23, 2008 Posts: 64 Location: Kamakura
Posted: Wed Sep 26, 2018 1:52 pm Post subject:
Are you saying renaming the keyboard to U (instead of J?, as the board is japanese to begin with)
Also if i used eeprom & configmagic , is the method pretty straight forward? i will test this soon enough tommorow.
SPPV V.I.P. Lifetime
Joined: Sep 13, 2010 Posts: 2644 Location: Kamloops BC Canada
Posted: Thu Sep 27, 2018 12:14 am Post subject:
Yeah region switching is pretty easy. Theres an option for it right in the Configmagic menu. Just dont power off the XBOX until you are sure its working.
As for the keyboard its just a guess based on looking at my NTSC dash files. It has them named KEYBOARD and JKEYBOARD
kaos_engr V.I.P. Lifetime
Joined: Jun 04, 2012 Posts: 194
Posted: Thu Sep 27, 2018 3:22 am Post subject: Re: Original System files location!?
modder84 wrote:
Do anyone know where the factory language files are within the system, as what drive and where.
I'm trying to switch the language on a system from NTSC-J to NTSC-U.
The console is tsop'ed and chipped with a Duox3. Thanks for any help. Its greatly appreciated!
You should be able to change the language in the MSDASH's Settings -> Language menu.
modder84 Xbox-HQ Member
Joined: Jul 23, 2008 Posts: 64 Location: Kamakura
Posted: Thu Sep 27, 2018 1:50 pm Post subject:
Eh!, Well im starting to thinking this isn't my issue now. So long story short,i was trying to get my xlink kai set up and play some Halo 2.
Again the console is NTSC-J. And so the game is displaying the games fonts in kanji but all other games of NTSC-U are fine, so was i'm wondering was it the systems' region settings causing this.
So i looked through some stuff, was curious about my bios in general and did a biochecker and my mod chip displays for x2 for the 256k and x4 for the 512k. Each with the same hash key,
So technically doesn't this mean there isn't a bios image attached to either bank? Meaning its a corrupt flash or blank bank?
IMG_0334.JPG
Description:
Filesize:
2.42 MB
Viewed:
349 Time(s)
SPPV V.I.P. Lifetime
Joined: Sep 13, 2010 Posts: 2644 Location: Kamloops BC Canada
Posted: Sat Sep 29, 2018 1:02 am Post subject:
If your BIOS was corrupt your XBOX would be booting either black screen or the classic E whatever with the service message. Never assume corruption based on what a piece of software tells you. Things like BIOS Checker are notoriously unreliable, My XBOX is a 1.6b softmod but according to BIOS checker Im running Evox M8+. And Version Checker just craps out and shows nothing for my XBOX version.
I would just chalk it up to homebrew with out enough QA done before release.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 10,064 | 
Guests: 1905 | 
Members: 0 
Forums 
