Posted: Sat Jan 02, 2010 12:07 am Post subject: Blank Screen
Hi
I have just updated my xbox. the hole installation goes prefect an when its time to reboot i doo that an remove the dvd an the screen goes blank
Any ideé what that can be?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat Jan 02, 2010 12:17 am Post subject:
Is it a chip or soft mod, what install method did you use and what drive did you install the dash to bro?
Helps to over explain your circumstances here so that we can get you an answer with as little back and forth posting as possible.
Lime89 Xbox-HQ Newbie
Xbox Version: v1.4 Modded: Aladdin xt, XBMC, EvoX
Joined: Jan 01, 2010 Posts: 5
Posted: Sat Jan 02, 2010 9:21 am Post subject:
I Fixed it:P, i just had to install the dashboard on to the c: drive also Then it worked
forahobby Administrator
Joined: May 22, 2003 Posts: 23947 Location: NSW, Australia
Posted: Sat Jan 02, 2010 9:32 am Post subject:
Lime89 wrote:
I Fixed it:P, i just had to install the dashboard on to the c: drive also Then it worked
Glad you got it sorted man.
Just a tip if you or others don't already know grab a hold of the "HQ Auto Installer Deluxe". It will have just about everything you need for your xbox 1 including dashboards and emulators.
But i had one problem and it was that th bios flash prog an bios checker dident work
I'm running cromwell 2.4 i think and i want to run EvoX M8 but i dont no if its nessecary to fash beucase its working fine now
Whats diffrens does it make i i flash to EvoX M8
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Sat Jan 02, 2010 1:43 pm Post subject:
The best bios is actually X2 5035 for your chip. It would allow you to boot DVD's and such. Cromwell won't let you boot unsigned code as far as I know. _________________
Lime89 Xbox-HQ Newbie
Xbox Version: v1.4 Modded: Aladdin xt, XBMC, EvoX
Joined: Jan 01, 2010 Posts: 5
Posted: Sat Jan 02, 2010 3:54 pm Post subject:
Im Using aladdin xt chip with 256 k bios äny godd way to flash it whitout bricking it
If you managed to boot the AID disc i doubt you have Cromwell as your Bios, If you can run homebrew and use AID id just leave the thing as it is .... If you do fancy messing around, i recommend the iND-BiOS 5003, its a good bios and will fit on your chip .... If things go tits up i`ve got a few 49LF020 chips that will replace the one in your aladdin, PM me if you require one. _________________
Lime89 Xbox-HQ Newbie
Xbox Version: v1.4 Modded: Aladdin xt, XBMC, EvoX
Joined: Jan 01, 2010 Posts: 5
Posted: Sun Jan 03, 2010 11:25 am Post subject:
whats the driffrens of change the bios from my ?? to the bios you recomend?
and witch way i best to do it?
If your xbox runs XBMC and EvoX i wouldnt bother flashing with a different bios.
If you feel the need to change the bios you have then just FTP into EvoX and drop your bios of choice into the bios folder then use the EvoX dashboard to re-flash. _________________
Jak3b0 Xbox-HQ Newbie
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: Jan 19, 2010 Posts: 2
Posted: Wed Jan 20, 2010 3:46 am Post subject:
Lime89 wrote:
I Fixed it:P, i just had to install the dashboard on to the c: drive also Then it worked
I've trying all night to install it but I stil ahve the blank screen. If I choose to install to the C, it will install the files to my E drive with a shortcut on my C. When I use the right thumbstick, I can see the volume level but the rest of the screen is blank.
Can you tell me more about how you got the installation working?
Here's my setup:
Version: 1.4
Modchip: Xenium ICE with Xenium os 2.3.0
BIOS: Xecuter2 5035 (not sure the size.. been a while)
HD: 100GB
Are you using the `Hardmod` section of AID to install your dash ? _________________
Jak3b0 Xbox-HQ Newbie
Xbox Version: 1.0 - 1.6 Modded: TSOP - Xecuter2.6
Joined: Jan 19, 2010 Posts: 2
Posted: Wed Jan 20, 2010 6:58 pm Post subject:
You mean as oppose ot the softmod? If that so, yes I did. Does xbmc still support non-hd tv?
DeviantewoK Xbox-HQ Newbie
Xbox Version: 1.6b Modded: Xenium ICE
Joined: Jan 24, 2010 Posts: 1
Posted: Sun Jan 24, 2010 7:41 am Post subject:
So I was having this same blank screen issue and this is how I got past it.
Since I could change the volume (per others findings) I figured I'd press a few other buttons to see if anything else worked since obviously I was in XBMC, I just couldn't see anything, like the skin wasn't loading correct. I clicked the Right thumb stick and it brought up the power menu, then I chose "info" this brought up the info screen "yay, I can see stuff!". Then I pressed the back button and to my surprise it went back to the main menu and XBMC/the skin was loaded fine. I rebooted and everything loaded as it should. I hope this helps some others
just some info:
Xbox 1.6b
Mod Chip Xenium Ice w/ Spice adapter
160GB HD
oh and hello everyone, new member, just joined so I could pass this along.
haemogoblin Xbox-HQ Newbie
Xbox Version: 1.6b Modded: Xenium ICE
Joined: Jan 22, 2010 Posts: 2 Location: In my chair
Posted: Sun Jan 24, 2010 6:29 pm Post subject: Message to DeviantewoK
Duuuuude, thank you!!!! Give me your address, i'm sending you a card on your birthday!!! JEEZ!! I'm been banging my nut against the wall with this problem..I thought i'd never get it fixed. I come on here tonight and you've solved it!!
Someone give this guy a Curly Whirly and a gold star
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum