Posted: Sat Jun 07, 2008 11:54 am Post subject: Goes back to Flashbios screen
So I installed a Xecuter2.6ce on my 1.4-1.5 xbox, everything wen't fine until I tried to intall the Bios through HTTP.
Unfortunatly I installed the wrong BIOS on the Bank1, and now it gives me error13, so i tried Installing the right BIOS (atleast I think it is the right one) on bank2 the bios is X25035, everything goes just like the tutorials I've read but instead of going to the BIOS Dash it just goes back to the Flashbios screen.
Since I ruined the first bank I want to be sure of what bios to use on bank2, and what procedures to follow.
Thanks for any help. \o
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat Jun 07, 2008 2:39 pm Post subject:
Welcome to the XBOX-HQ, we hope you enjoy this and all the other HQ sites we have to offer.
What bios did you put in bank one?
The error its giving you is saying it cant find your dash files, if you know whare the dash xbe is located on your HDD you can use X-2 config to set it it up right.
FulanoTal Xbox-HQ Newbie
Joined: Jun 07, 2008 Posts: 5
Posted: Sat Jun 07, 2008 2:49 pm Post subject:
Thanks for the welcome
Well, it's a new HDD so it doesn't have anything inside it, I installed the chip because the original onegot ruined and I had no way to recover the EPPROM(?).
I installed the EvoXM8Plus 256k on Bank1 but I only realized that I needed to put a 512k after I ruined bank1 =(
And then I flashed bank 2 with X2 5035 and everything goes as it should but instead of going to the BIOS Dash it just goes back to the Flashbios screen, and before I tried flash bank2, when turned the console on Bank1 it FRAGGED. After I tried flashing bank2 whenever I try to turn on the console on bank1 it shows me error13.
Now my problem is that I can't flash bank2, I'm not sure why this is happening since I followed the Tuts around the internet.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat Jun 07, 2008 3:09 pm Post subject:
The bios has no dash on it, you need an auto installer to add a dash.
Read the guide that comes with it and burn the iso to disk, Dont get aid 4.21 it is an update pack you need 4.20 since it has the ISO.
FulanoTal Xbox-HQ Newbie
Joined: Jun 07, 2008 Posts: 5
Posted: Sat Jun 07, 2008 3:20 pm Post subject:
Thanks for the reply.
I'm going o download AID 4.20. , but having the AID in a DVD how do I install it? I mean, I have a Slayers 2.7 CD here, which I think it's basicly the same as AID in installation ways and such, and I can't install it, as for what I've seen you can only install it after flashing the bios.
But then again I'm a total noob in xbox modding so correct me if I'm wrong at something =P
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat Jun 07, 2008 4:21 pm Post subject:
You said you did flash the bios but it loops, im guessing it should be looking for a dash but since the HDD is blank you have no dash.
Do you see the xecuter rox my box when you boot it up?
FulanoTal Xbox-HQ Newbie
Joined: Jun 07, 2008 Posts: 5
Posted: Sat Jun 07, 2008 4:42 pm Post subject:
No it goes straight to the Flashbios screen, like I said before I flash it (or atleast I try) just like they say in the Tutorials, and it goes fine but instead of going to the bios options or something it just goes to flashbios screen again.
But neverthless I'm downloadin the AID 4.20 now and I'll have it in 2hours, then I'll see if I can install everything correctly.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sat Jun 07, 2008 8:22 pm Post subject:
If you read the guide for aid you will see how to add the addons and that will put a bios flash tool on the disk for you.
FulanoTal Xbox-HQ Newbie
Joined: Jun 07, 2008 Posts: 5
Posted: Sat Jun 07, 2008 8:36 pm Post subject:
Problem solved, the flash was alright, the problem was the Slayer's cd that I burned at high speed, so the Xbox couldn't read it. But I'm glad I discovered AID, ot's much more complete.
Well, thank you so much fot all the help.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Sun Jun 08, 2008 5:38 am Post subject:
No prob man, need anything more just hit up the site.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum