Posted: Wed Oct 13, 2004 7:24 pm Post subject: Soldering - any tips?
few quick questions on how to solder:
1. Does the wire have to be touching the connection point or can the signal transfer through the solder itself?
2. Does the amount of solder on a connection change anything?
3. Any general advice? I haven't soldered before, but I'm looking to get into it.
Guest
Posted: Wed Oct 13, 2004 7:25 pm Post subject:
Does the type of solder matter? Lead/tin/silver? Width?
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Oct 14, 2004 12:47 am Post subject:
Quote:
1. Does the wire have to be touching the connection point or can the signal transfer through the solder itself?
The signal can go through the solder. The solder makes a joint that promotes continuity.
Quote:
2. Does the amount of solder on a connection change anything?
Yes. If you put too much solder on it, you can bridge another solderpoint and create a short so to speak. If you put too little solder on it you can have gaps in your LPC point and not get a good connection, losing your continuity.
Quote:
3. Any general advice? I haven't soldered before, but I'm looking to get into it
Take your time. Practice. Start off practicing with a 15 watt iron soldering LED's and wires to LED's. Then move up to a 25 watt iron and practice on PCB's.
People have different views on this...some people say only use a 15 watt iron when soldering a pinheader to a mobo, I say use a 25 watt. The hotter the iron the quicker the solder will adhere to the joint. The better connection you get, the less time you have to heat the spot. I get more frags when using 15 watt than 25 watt. I never use the 15 watt anymore unless it's for soldering wires to LED's and stuff.
Quote:
Does the type of solder matter? Lead/tin/silver? Width
Use hydrogemonic X247 solder in it's inert state. Just kidding....couldn't resist. I just use Radio Shacks Rosin-Core Solder for PC work. I try to find it at .022 or .015 thickness, but .032 will work good, just be careful.
later man
realmccloy
--------------------------
http://www.xbox-hq.com http://www.themodgod.com[/quote] _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
NVousMotorSports V.I.P. Lifetime
Joined: Jun 21, 2004 Posts: 111 Location: San Francisco California
Posted: Thu Oct 14, 2004 7:13 am Post subject:
hahaha. Just Couldnt Resist huh? *Whip* NOW GET BACK TO WORK!!!!!
Hahahaha Just Kidding. I Couldnt Resist..
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum