Posted: Sat Jul 28, 2007 3:44 pm Post subject: Having problems flashing bios to Executer 3 CE Solderless
Okay I have the Executer 3CE solderless modchip all installed and everything hooked up correctly and now I am sitting here looking at a flash bios 3.0.1 screen that says hdd: st310014a 3.09 10.242GB which is my stock seagate hard drive and then it says DVD SAMSUNG DVD-ROM SDG-605F which is my dvd drive. On the bottom of the screen it says Enable network flashing,load bios from hdd,load bios from disc,unlock hdd and lock hdd which are of course the options. I have a version 1.4 xbox. Now me and my friend Wes were up till 2am trying to get the dang thing to load bios from disc and nothing worked. Is there another way of flashing the bios or is there something I am doing wrong with the disc? I only have a cd burner not a dvd burner. I Have searched every tutorial and so far no luck. Any and all help you could provide would be greatly appreciated. Thank you =)
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Sat Jul 28, 2007 4:21 pm Post subject:
well, does "Enable network flashing,load bios from hdd,load bios from disc" tell you anything about other ways of flashing the bios? _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
pezzar V.I.P. Lifetime Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: May 12, 2005 Posts: 976 Location: Seaside, England
Posted: Sat Jul 28, 2007 4:24 pm Post subject:
flashing the bios over http is by far the best way. Do you have the xbox networked to the pc?
welard V.I.P. Lifetime Xbox Version: 1.3/1.4 Modded: xecuter 3
Joined: Mar 03, 2006 Posts: 164
Posted: Sat Jul 28, 2007 6:34 pm Post subject:
have u selected the right banks for flasing ie bank 1 on bank 2 on bank 3 off bank 4 off _________________ XBox, Ver. 1.2,1.3, Excuter 3 Modchip + Excuter control panelX3 Kernel Version: 1.0.5034.1Hard Drive Model : Maxtor 6Y120L0DVD Model : THOMSON-DVDHard Drive Capacity : 114.50 GBytes& xbmc Evox& I am running debug sdk to now
Rebelcharm Moderator
Joined: Jul 10, 2007 Posts: 1373 Location: TX
Posted: Sat Jul 28, 2007 7:13 pm Post subject: Connected to PC
I am following the http://www.team-xecuter.com/flashbios/http.htm tutorial and I have done everything to the letter. But when it tells me to put in my 192.168.0.99 in the address column and hit go it says the web page you have requested is not available. As far as the switches on the switch are concerned again I did exactly like the tutorial says but still no go. So I don't understand what is going on. My friend Wes and I have thrown everything at it and it still won't flash the bios. Any and all suggestions would be greatly appreciated.
welard V.I.P. Lifetime Xbox Version: 1.3/1.4 Modded: xecuter 3
Joined: Mar 03, 2006 Posts: 164
Posted: Sat Jul 28, 2007 7:18 pm Post subject:
are u running thought a router? _________________ XBox, Ver. 1.2,1.3, Excuter 3 Modchip + Excuter control panelX3 Kernel Version: 1.0.5034.1Hard Drive Model : Maxtor 6Y120L0DVD Model : THOMSON-DVDHard Drive Capacity : 114.50 GBytes& xbmc Evox& I am running debug sdk to now
Rebelcharm Moderator
Joined: Jul 10, 2007 Posts: 1373 Location: TX
Posted: Sat Jul 28, 2007 8:44 pm Post subject: Router
Nope running a crossover cable straight from the computer to my xbox. No router or hub. Another thing I might mention if this has anything to do with it is that I am on dial-up sad but true and I live too far in the country to get anything else. Anyhow that is the situation as of now. Any suggestions or comments would be greatly appreciated...Thank you
welard V.I.P. Lifetime Xbox Version: 1.3/1.4 Modded: xecuter 3
Joined: Mar 03, 2006 Posts: 164
Posted: Sat Jul 28, 2007 8:47 pm Post subject:
i think your network is not setup right
but i cant help ya on that 1 sorry _________________ XBox, Ver. 1.2,1.3, Excuter 3 Modchip + Excuter control panelX3 Kernel Version: 1.0.5034.1Hard Drive Model : Maxtor 6Y120L0DVD Model : THOMSON-DVDHard Drive Capacity : 114.50 GBytes& xbmc Evox& I am running debug sdk to now
Rebelcharm Moderator
Joined: Jul 10, 2007 Posts: 1373 Location: TX
Posted: Sat Jul 28, 2007 9:21 pm Post subject: Flashing Bios
Umm Welard....I see that you have the same chip I do. Care to share how you flashed your bios? Thanks
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Sat Jul 28, 2007 9:46 pm Post subject:
i did the network flash. Since your on a crossover cable you need to give your pc a dif IP. But remmeber to put it back on auto once you get done so you will have internet!!!! Give it an IP like 192.168.0.98 and see what happens. _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
boobs Xbox-HQ Elite Member Xbox Version: V1.6 V1.3 Modded: X3CE
Joined: Dec 13, 2005 Posts: 303 Location: Australia N.S.W
Posted: Sat Jul 28, 2007 11:03 pm Post subject:
http://www.team-xecuter.com/flashbios/
and you did use cd-rw or dvd and not cd-r they dont work
is flash protect turned off on chip you should have two blue one red led not green
switch should be set to on on off off off when flashing
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 7,959 | 
Guests: 924 | 
Members: 1 
Forums 
