Posted: Mon Jan 01, 2007 9:41 pm Post subject: Installing XBMC from AID 3.1 help
Hey people, i managed to get the softmod up and running and im using unleashx.
I load up the AID disk and it loads up. I go to one-click install, and then XBMC.
I start it off and i get error straight away (something about unzipping), click ok and it carries on, another error, continue and it says complete.
You need to reboot your xbox ..blah... do that and nothing happens.
I try booting it without a disk, open tray,with the aid disk in.. and it just hangs with a black screen and red LED.
could you please help, i would appreciate it.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Mon Jan 01, 2007 10:06 pm Post subject: Re: Installing XBMC from AID 3.1 help
singh400 wrote:
Hey people, i managed to get the softmod up and running and im using unleashx.
I load up the AID disk and it loads up. I go to one-click install, and then XBMC.
I start it off and i get error straight away (something about unzipping), click ok and it carries on, another error, continue and it says complete.
You need to reboot your xbox ..blah... do that and nothing happens.
I try booting it without a disk, open tray,with the aid disk in.. and it just hangs with a black screen and red LED.
could you please help, i would appreciate it.
Sounds like you may need to burn your DVD again, possibly at a slower burning speed. There shouldn't be any unzipping problems.
singh400 Xbox-HQ User
Joined: Dec 31, 2006 Posts: 18
Posted: Mon Jan 01, 2007 10:38 pm Post subject:
the dvd works..it launches AID
but when i do the one-click install i get an error
error unzipping and error code = 0
when it reboots it tells me to complete the install, i do so by pressing A.
It reboots and hangs at a black screen with a RED LED showing.
awacsnl Xbox-HQ Member
Xbox Version: V1.6 Pal R2 Modded:
Joined: Jan 04, 2006 Posts: 53 Location: tHE nETHERLANDS
Posted: Tue Jan 02, 2007 9:37 pm Post subject:
If you have already a softmod on it you cannot do one click install
if you are using sid 4.5 just go to the hacked dashboard section
INSTALL HACKED DASHBOARD, XBMC. to E drive
singh400 Xbox-HQ User
Xbox Version: V1.6 Pal R2 Modded:
Joined: Dec 31, 2006 Posts: 18
Posted: Wed Jan 03, 2007 11:59 am Post subject:
thanks for the advice peple, but i managed to sort it by re-installed the softmod with the plain and simple SID instead of the knave edition. And re-burnt the iso at the slowest speed, and viola worked first time.
How would i now go about making xbmc my default daash when i boot up?
currently i have to go to unleashx >>apps
robbieboy Xbox-HQ Freak Xbox Version: V1.6 Pal R2 Modded:
Joined: May 15, 2006 Posts: 911
Posted: Wed Jan 03, 2007 12:21 pm Post subject:
Do you have the music on your aid disk...???? If so dose it cut out after a few sec's if so you will need to use a diffrent DVD disk, cos mine used to do that and it used to hang when installing anything from aid....
This is how i did it...
****BACKUP GAMESAVES****
THEN*
Boot Aid3.10...
Fromat HDD...
Prepare E Drive And F Drive... (if you have F drive)
Put MS-Dash on C Drive And backup in E Drive using Aid Disk...
Backup EEprom...
Oneclick install Sid 4.5 with XBMC as dash...
P.S. DO NOT TURN OFF UNTILL IT TELLS YOU WHEN IT'S INSTALLING SID 4.5
Then you will have a clean install and no errors
Put back GAMESAVES...
Done.. _________________
awacsnl Xbox-HQ Member
Xbox Version: V1.6 Pal R2 Modded:
Joined: Jan 04, 2006 Posts: 53 Location: tHE nETHERLANDS
Posted: Wed Jan 03, 2007 2:37 pm Post subject:
if you have sid4.5 just go to install hacked dashboard and select E drive and XBMC.
If you have an other softmod, go to hacked dashboard softmod section
and select E drive and XBMC.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum