HQ NETWORK:   XBOX ONE |  XBOX 360 |  AIDELUXE HQ Network: 13,699 | Guests: 7939 | Members: 1 


   Current Location: Forums New google drive   |   Which modchip is this?   |   Anyone here capable or interested in restarting XBConnect?   |   Error code 05   |   original xbox with 0 memory   |   Why cell damage is low with ratings   |   New Game - Fursan al-Aqsa - Knights of al-Aqsa Mosque   |   Xbox-Hq.Com VIP Member Testimonials   |   XBHD: A Full-Featured Original Xbox Adapter from EON Gaming,   |   Best place for XBox ROMS?   |   
  Home | Active Topics | CD/DVD Media | Downloads | Forums | Feedback | Games | HardDrives | Homebrew | My Profile | ModChips | Reviews | Search | SoftMods | Tutorials

Xbox Forums

Discuss all aspects of the original Xbox Console in our Interactive Xbox Forums..

Get Xbox Game Pass Ultimate
Xbox-Hq.Com :: View topic - X bit people look hear... explain my proble here clearly..
Xbox-Hq.Com Forum Index -> DMS ModChip Discussions (X-B.I.T)
Post new topic Reply to topic    
 X bit people look hear... explain my proble here clearly.. View previous topic :: View next topic  
 
 
 
 
Cream
Xbox-HQ Newbie
Xbox-HQ Newbie



Joined: May 26, 2006
Posts: 7

Post Posted: Mon May 29, 2006 12:11 am   
Post subject: X bit people look hear... explain my proble here clearly..
Reply with quote
 
I have an 1.6v Xbox with an 1.5v Xbit mod chip with the adapter

http://www.mod-chip.com/Lite/XBit_Mod_Install_V1.6_Lite.pdf
The link above tells you how to install your chip however they are missing pieces.
I also make reference to it

I am going to the wire installation method, finding it easyer to do..
I have all the materials shows in the pictures on the site.

I have connected the 1.6 converter PCB with 1.6 wire harness on the left and the 1.6 wire converter on the right.

The wire converter is going to the Xbit PCB on the top.
The black and yellow wires are connected to the external PCB. and the usb cable connected exteral PCB.

Now having that said, the wire harness ( the one shown on the first page of materials) is left,

I solder the v1.6 wire harness to the plc port as shown in figure # 7
However, not wanting to have the modchip on all the time iam going to take the orange wire from the v1.6 wire harness and take the orange from the regular wire harness and connect them and routing them to the top as shown in figure 9 and 10

With me so far, now i get confused...

It says to "Now rebuild the LPC port" using the section below with is not there..
I have no clue what to do ??
i have looked at the pictures on the dms3 site but there only picutes no instructions.
and which wires do i use to rebuild the plc port?? i am think the wire harness (which i took out the orange wire) since i see no use for that...

If i do all that including the now rebuild the lpc port am i done with installing my mod chip?? ( i have already flashed it with EvolutionM8 plus)

Also , i have the Modchip dvd power harness? can you explain where than is connected , there are yellow wires on each side, with and red and black wires seperating...showin the site


View user's profile Send private message
 
 
 
 
impwiz
V.I.P. Lifetime

Xbox Version: all
Modded: everything

Joined: Aug 30, 2005
Posts: 1070
Location: Detroit

Post Posted: Mon May 29, 2006 3:12 am   
Post subject: Re: X bit people look hear... explain my proble here clearly
Reply with quote
 
Cream wrote:


1. I solder the v1.6 wire harness to the plc port as shown in figure # 7
However, not wanting to have the modchip on all the time iam going to take the orange wire from the v1.6 wire harness and take the orange from the regular wire harness and connect them and routing them to the top as shown in figure 9 and 10

With me so far, now i get confused...

2. It says to "Now rebuild the LPC port" using the section below with is not there..
I have no clue what to do ??

3. i have looked at the pictures on the dms3 site but there only picutes no instructions.
and which wires do i use to rebuild the plc port?? i am think the wire harness (which i took out the orange wire) since i see no use for that...

If i do all that including the now rebuild the lpc port am i done with installing my mod chip?? ( i have already flashed it with EvolutionM8 plus)

4. Also , i have the Modchip dvd power harness? can you explain where than is connected , there are yellow wires on each side, with and red and black wires seperating...showin the site


1. could you be more clear? Are you going to put a switch or something in?

2. look at the DMS site's pictures, and make sure they match yours. Never mind the words. I think the LPC rebuld is the small pcb that the multi-color harness plugs in (SEE PICTURE ATTACHED- That's the LPC rebuild).

3. the orange wire is there for a reason. So the chip works. it's part of the 1.6 rebuild. Figure #10- solder the orange wire to that regulator's leg.

4. Replace your current dvd power harness with the supplied. Then, plug it in your chip.



XBIT.gif
 Description:
1.6 LPC rebuild
 Filesize:  51.45 KB
 Viewed:  190 Time(s)

XBIT.gif



_________________


View user's profile Send private message Send e-mail
 
 
 
 
Cream
Xbox-HQ Newbie
Xbox-HQ Newbie

Xbox Version: all
Modded: everything

Joined: May 26, 2006
Posts: 7

Post Posted: Mon May 29, 2006 3:34 am   
Post subject: yes
Reply with quote
 
yes i have them...

the 1.6 wire harness and 1.6 converter harness are both connected to the 1.6 converter PCB. Also shown in the link in my previous post....
and explaind in the post too.

there are two wire harness!
however in the manual only one is shown to be in use.... which is the 1.6 and the other one has no instructions on what it should done with

one is 1.6 wire harness which goes into the 1.6 converter PCB and the other one is just a wire harness.
if you look again at the site...it shows your two wire harness

Now since the manual is not full , the lpc rebuild is what is left out...
and since the wire harness( not the 1.6 one is not being used expect the orange wire which is extended to the other orange wire as shown in the manual figure 9 and 10 ) i am thinking i have to take the wires off that and rebuild the lpc port? correct??

3. the orange wire is there for a reason. So the chip works. it's part of the 1.6 rebuild. Figure #10- solder the orange wire to that regulator's leg.
i have done that...

now there a wire harness with out an orange wire...
and with that wire harness i need to take the other wires and rebuild the lpc

this is were i need help..


View user's profile Send private message
 
Display posts from previous:   
  Post new topic  
 
  Reply to topic  
|
 All times are GMT | Page 1 of 1
Jump to:  
 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
 


Get Xbox Game Pass Ultimate