Posted: Mon Jul 18, 2005 12:10 am Post subject: Xbox Modchip Instructions
i bought an xbox mod chip with a 1 solder wire, and i still don't know where to solder a modchip into my xbox, i just know how to take it apart, and i also have no idea on how to get my modchip to work with any of my xbox games, so basicly i'm totally new to modchips, i don't know anything about them except that they mod xbox games, i don't know how. So if anyone can give me instructions on how to install a 1 solder modchip, how to get it to work with both my xbox and my xbox games, thank you.
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Mon Jul 18, 2005 2:16 am Post subject:
Can you be more specific. What mod chip did you buy. What version Xbox do you have? Are you also putting in a larger HD? _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
PureAlcateaz Xbox-HQ Newbie
Joined: Jun 28, 2005 Posts: 3
Posted: Tue Jul 19, 2005 4:30 pm Post subject:
TheModGod wrote:
Can you be more specific. What mod chip did you buy. What version Xbox do you have? Are you also putting in a larger HD?
i bought the Xchanger (Version 2) i don't know if i need to put in a larger HD, like i said, i'm totally new to the subject, i have no training in any electronics. so i don't know what version of xbox i have. and i need to know how and where to install it to the motherboard
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Tue Jul 19, 2005 4:36 pm Post subject:
Okay, first thing you need to do is determine what version Xbox you have.
That will effect the way you install the chip.
If its a 1.0 to 1.5 you want to solder the pin header in. If it's a 1.6 it's a quick solder on the mobo, which actually handles the chip install and LPC rebuild all in one motion.
Next, also you will need a bios to flash to the mod chip. From the same site please read up on flashing the chip. I prefer the network flashing method which is a very nice feature for a 20 dollar chip! I wish the LT OPX had this.
You will need a 256k bios. I suggest X2 4983.06 if you have version 1.0 to 1.5 Xbox, and M8plus if you have version 1.6or 1.6b Xbox.
We have these available here in our VIP download section.
Once you have the chip installed and flashed, now it's time to add files to your HD.
You should get a hold of an autoinstaller, preferably AID 2.0.2
This will allow yo to prepare your existing HD, install apps, emu's, dashboards, etc.
HOwever, I emplore you to consider a larger HD. Your stock HD wont hold squat. It's 8-10GB in size and you will only have about 4.6GB of free space on you E drive after apps are added.
If you get a 120GB or larger, you will then get an F drive and can have all kinds of space for game downloads and other storage.
Hopefully, this is enough info to get you started. You'll like the Xchanger. I have installed a lot of these chips lately. Haven't had any issues yet.
TheModGod
---------------------
http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
PureAlcateaz Xbox-HQ Newbie
Joined: Jun 28, 2005 Posts: 3
Posted: Tue Jul 19, 2005 10:02 pm Post subject:
TheModGod wrote:
Okay, first thing you need to do is determine what version Xbox you have.
That will effect the way you install the chip.
If its a 1.0 to 1.5 you want to solder the pin header in. If it's a 1.6 it's a quick solder on the mobo, which actually handles the chip install and LPC rebuild all in one motion.
Next, also you will need a bios to flash to the mod chip. From the same site please read up on flashing the chip. I prefer the network flashing method which is a very nice feature for a 20 dollar chip! I wish the LT OPX had this.
You will need a 256k bios. I suggest X2 4983.06 if you have version 1.0 to 1.5 Xbox, and M8plus if you have version 1.6or 1.6b Xbox.
We have these available here in our VIP download section.
Once you have the chip installed and flashed, now it's time to add files to your HD.
You should get a hold of an autoinstaller, preferably AID 2.0.2
This will allow yo to prepare your existing HD, install apps, emu's, dashboards, etc.
HOwever, I emplore you to consider a larger HD. Your stock HD wont hold squat. It's 8-10GB in size and you will only have about 4.6GB of free space on you E drive after apps are added.
If you get a 120GB or larger, you will then get an F drive and can have all kinds of space for game downloads and other storage.
Hopefully, this is enough info to get you started. You'll like the Xchanger. I have installed a lot of these chips lately. Haven't had any issues yet.
thank you, but i would like you to respond to your Pm's, and i have checked out your store, and those are some nice skins!
i also downloaded 2 files, they are map editors, and a patcher, but they are .rar files, and i don't what i can use to open them.
qball Xbox-HQ Newbie
Joined: Sep 23, 2005 Posts: 6
Posted: Fri Oct 21, 2005 7:06 pm Post subject: winrar
you can open them using winrar. you can find this by doing a google search and downloading it. it is a handy program to have.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,306 | 
Guests: 1085 | 
Members: 3 
Forums 
