TriZz Xbox-HQ User Xbox Version: Xbox V1.3 Modded: Xecuter3CE
Joined: May 29, 2005 Posts: 12
Posted: Thu Jun 16, 2005 2:21 am Post subject: Xecuter 3 - Get's stuck at "Xecuter Rox my Box"
I got pretty pissed about my room mates using my Xbox when I'm at work...so I password protected the BIOS.
After I set up a password, I restarted the Xbox to make sure it works...and it gets to the XBOX screen with the "Xecuter rox my box" at the bottom and freezes.
...any ideas on how I might resolve this?
I've tried to flash the BIOS to no prevail. If I turn the chip off (hold the power button when I turn it on) it loads to the MS dashboard.
Other useful info may be that I have an upgraded hard drive in the box...
Joined: Mar 12, 2005 Posts: 1887 Location: Orlando/West Palm Beach, FL USA
Posted: Thu Jun 16, 2005 2:30 am Post subject:
Try holding ABXY on boot, its the X3's eeprom *not your xbox's) reset, so it might disable the option that caused it to lag. It restores everything on the chip to default _________________ XBOX v1.6
X3|.3294|XBMC
TriZz Xbox-HQ User Xbox Version: Xbox V1.3 Modded: Xecuter3CE
Joined: May 29, 2005 Posts: 12
Posted: Thu Jun 16, 2005 2:41 am Post subject:
No such luck, when I hold ABXY...it still just goes to that "rox by box" thing and stays...
Joined: Mar 12, 2005 Posts: 1887 Location: Orlando/West Palm Beach, FL USA
Posted: Thu Jun 16, 2005 2:51 am Post subject:
Um, another usual solution would be to flash a stable x2 bios to a bank see if that works for you, and try reflashing the other bank, it will hopefully give you ftp access.
Just do the backup flashbios power+eject., you should get a purple X, if you do it right and get a black screen, hold the eject button a split second after the power.
The X2 is a lite bios and doesn't require a lot like the x3. you might just try to reflash with a different x3 build. _________________ XBOX v1.6
X3|.3294|XBMC
Joined: Mar 12, 2005 Posts: 1887 Location: Orlando/West Palm Beach, FL USA
Posted: Mon Jun 20, 2005 3:53 am Post subject:
Not sure, I will check and get back with you on that, i might be tommorow. If someone else answers awesome, but i am going to go to bed early finally in a longggg time.
Only way would be to flash each specific bank back with flashbios 3.01 (1234) and 3.03 (5678) and erase the eerpom. Also, delete the data.ini file from the E: drive and any other user data.
It would take work, a programmer like the x2 would make it an easier job to reset.
Doesnt the x3 erase w/ 1959 erase the eeprom?? _________________ XBOX v1.6
X3|.3294|XBMC
TriZz Xbox-HQ User Xbox Version: Xbox V1.3 Modded: Xecuter3CE
Joined: May 29, 2005 Posts: 12
Posted: Thu Jun 23, 2005 10:43 pm Post subject:
I'm such a noob...I have no idea what you're talking about.
Perhaps a step by step might be helpful?
I just tried going in and taking the chip out and running it without the chip and then re-installing but that did nothing.
I'm completely lost
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 20,561 | 
Guests: 5908 | 
Members: 0 
Forums 
