Posted: Mon Apr 11, 2005 7:29 pm Post subject: I dont have a clue
I ordered the x3 mod chip and the xapter solderless. well i broke the d0 wire on the xapter so i soldered the x3. when i put everything back together the xbox light in the front blinks red orange and green and i dont have any picture on my tv. the remote lights up red like its disabled. i followed the instructions from team xecuter and everything looks to be in order i have no clue whats wrong with my box. please can someone help me???
XoLeSTaToX Xbox-HQ Member Xbox Version: V1.6 Modded: Xecuter3
Joined: Apr 03, 2005 Posts: 86 Location: California
Posted: Mon Apr 11, 2005 8:50 pm Post subject:
I had he same problem, all the advice I got (Since they can't really see what is going on) is to check, re-check, and check again. Do any of the lights on the x3 come on? Which ones do if any? Look for any splashes anywhere on the board. If any of your solder points look sloppy, desolder and try again. If you have a multi-meter check your points. I had to resolder mine like 6 times before I got it right. Of course I never soldered. Oh, and if you did a PCB rebuild check that especially, it was a bitch. If all else fails, http://www.themodgod.com does repairs I believe. (There are other sites as well, that's just the one I know is highly referred. Keep checking back as I'm sure someone can help you better than me. _________________ XBOX v1.6:
Xecuter 3 CE
Xecuter 3108 bios
Maxtor 250 gig
set up by Xbox-HQ AID
EvoX 3935 Dashboard
thedude2004 Xbox-HQ Experienced Xbox Version: Xbox v1.2 & 1.4 Modded: SID 2.0
Joined: Mar 02, 2005 Posts: 106 Location: Liverpool, UK
Posted: Mon Apr 11, 2005 10:14 pm Post subject:
i got this when i first tried to install the x3, i have no clue why but i can only get it to work when al the dip switches are set to off, if i turn any on the same problem returns _________________ XBOX v1.4
Xecuter 3 (3108 Bios) {With X3CP}
IR Power Mod
EvoX Dash / Avalaunch
120 Gb WD Hdd
Green EL 'X'
12" UV & Blue Plasma Underlight
Blue Controller ports
12v 80mm Clear Fan
Stock eject with 50/50 mod
Decals from GCSkins
XoLeSTaToX Xbox-HQ Member Xbox Version: V1.6 Modded: Xecuter3
Joined: Apr 03, 2005 Posts: 86 Location: California
Posted: Tue Apr 12, 2005 12:21 am Post subject:
hmmm, Fill out a help ticket if you haven't already, or you can try to get help from the seller. _________________ XBOX v1.6:
Xecuter 3 CE
Xecuter 3108 bios
Maxtor 250 gig
set up by Xbox-HQ AID
EvoX 3935 Dashboard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 7,943 | 
Guests: 912 | 
Members: 0 
Forums 
