Posted: Wed Dec 15, 2004 11:33 pm Post subject: lockup
I have burnt both 1.0 and 1.1 to dvds and when I put them in my xbox and boot up it seem to lockup on the screen where you make a choice about formating the hddd or installing applications...it goes through the music screen with all the info at the bottom but I cannot move the cursor around or activate any buttons when at the next screen...I even went as far at hitting the a button when it was on the format choice...didn't do nothing...I have a 1.1 xbox w/80gb drive executer 2 mod chip...any suggestions...
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Thu Dec 16, 2004 12:45 am Post subject:
Were you able to press the A button to skip the intro?
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Thu Dec 16, 2004 12:54 am Post subject: yeahhh
things i can think of ......
1. bad burn
2. bad media
3. ditry laser lense
4. corrupt bios (use x2 4983.06 or M8+)
5. partitions on the harddrive that are not FatX?
6. harddrive jumper not set to slave? _________________ Xbox v1.0/1.1/1.5/1.6a
TSOP Flash,aladdin,xenium,duox2,x2.3b
Bios Xecuter2 4983.06
HDD 80Gb-250GB
DVD Drive Samsung 616t (modded),+all stock drives
Dash UnleashX ,
ATA 133 cable
BG Xbox-HQ Newbie Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Dec 15, 2004 Posts: 4
Posted: Thu Dec 16, 2004 2:03 am Post subject:
DJB wrote:
Were you able to press the A button to skip the intro?
yep...got past the intro and as soon as the menu comes up I can quickly hit the down on the d-pad and can go down 2-3 places before it locks up...tried to burn it on 3 different types of media, 1x, both the 1.0 and 1.1 versions. the only thing that I have never had any problems with the lens,drive or jumper settings..the only thing that I havn't checked (because I don't know how to check or upgrade) is the bios version...I currently recently used slayers 2.6 when it came out to re-do my drive...
BG Xbox-HQ Newbie Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Dec 15, 2004 Posts: 4
Posted: Thu Dec 16, 2004 3:22 am Post subject:
successfully got the bios to upgrade from 4977 to 4983.06, didn't make any differance...still locks up after 1 second...but now trying to figure out how to make my evox x boot up...after I flashed the bios it goes to the ms dashboard
BG Xbox-HQ Newbie Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Dec 15, 2004 Posts: 4
Posted: Thu Dec 16, 2004 2:11 pm Post subject: Re: yeahhh
bobrownik wrote:
things i can think of ......
1. bad burn
2. bad media
3. ditry laser lense
4. corrupt bios (use x2 4983.06 or M8+)
5. partitions on the harddrive that are not FatX?
6. harddrive jumper not set to slave?
I got it working...when I used slyers auto installer I had the dashboard and all apps installed on the f drive instead of the c drive...reformatted and installed to c drive and it works fine...
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 10,095 | 
Guests: 2492 | 
Members: 0 
Forums 
