Posted: Wed Dec 08, 2004 1:47 am Post subject: X-CHIP Loading Trouble
I obviosly have an x-chip...i flashed it a while ago and it worked...then on day it wouldnt turn on.
It loads up with the green LED...then 3 seconds it shuts down...the LED Turns off...Then 3 seconds later its on witht he Green LED...Then off and then on with a blinking red/yellow LED....the TV shows nothing the whole time.
Canb anyone help me out?
Thanks a mill in advance
slick_j_2002 V.I.P. Lifetime
Joined: Oct 29, 2004 Posts: 273
Posted: Wed Dec 08, 2004 4:02 am Post subject:
So it was working, and then it stopped?
Did you use a solderless install? If you did, the adapter probably slipped out of place and just needs to be popped back on.
If it's a solderfull install (???), then it could still be a hardware issue, like a wire falling out of its joint or somesuch. Can you boot to the MS dash?
schirmk V.I.P. Member
Xbox Version: Xbox V1.0 Modded: Chameleon
Joined: Aug 09, 2003 Posts: 615 Location: Seattle, WA
Posted: Wed Dec 08, 2004 4:31 am Post subject:
Hey Corn, we need a little more info from ya mate. Like slick said is it a solderless mod or did you solder it in.
What did it do the first time and is it the same now? Can it boot to ms dash vs evox? Can it boot to a disk? What happens when you start the xbox by opening the dvd drive?
Just a handful of questions that can help us out in helping you out. Anything else you can htink of that would be of some help would be great. _________________ XBOX v1.0:
Solderless Chameleon
Evox M7 Bios
160GB Maxtor HDD
EvoX 3921 Dashboard
Avaluanch Dashboard
corn Xbox-HQ Newbie
Xbox Version: Xbox V1.0 Modded: Chameleon
Joined: Dec 07, 2004 Posts: 3
Posted: Wed Dec 08, 2004 11:44 am Post subject:
I have a sloderless adapter for it. I tried boot with the disktray opener button and the same thing happened.
Like i said my screen is black the whole entire time.
I opened my xbox and took the modchip off of the solderless adapter, and tried to turn on the xbox...The xbox turned on and work fine as a unmodded xbox. I put the chip back on and it didnt work as before.
The first time i turned on the xbox, plugged it into my computer with a USB cord and flashed it with X-Control with x-chip Evox 2.5. I restarted my xbox and it workeed...then i put on slayers auto installer.
I tried using all different bios's to flash my xbox with and have used the backup one i made a lot also, but none of them seem to change the xbox.
TheModGod Xbox-Hq Legendary Xbox Version: Xbox V1.0 Modded: Chameleon
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Dec 09, 2004 4:24 am Post subject:
It just sounds like the solderless adapter isn't tight or aligned properly.
If you truly think you have it installed okay, maybe your bios became corrupt?
It's hard to say, but I am leaning toward alignment issues.
TheModGod
----------------------
http://www.xbox-hq.com http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
corn Xbox-HQ Newbie
Xbox Version: Xbox V1.0 Modded: Chameleon
Joined: Dec 07, 2004 Posts: 3
Posted: Fri Dec 10, 2004 11:51 am Post subject:
yep, thanks a lot...it was the alignment issue. I took everything out...and then put it all in harder. Noiw it works..
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum