Posted: Thu Nov 18, 2004 7:05 am Post subject: Xecuter 2.6 Lite Help
I just got my Xecuter chip and I am excited about getting it working, the problem is that I cant. I followed a good tutorial to physically install it, which I did. When I power on the Xbox it starts for about 1 second (the blue LED works and the power light is green), then turns off for about 3 seconds, then starts again, then off again, then starts again. After it finally stays on the blue LED remains lit up on the Chip, but the power switch is flashing green and red. When I turn the chip off, the XBox works fine, so I dont know what the problem is, or how to fix it. I am completely new to all of this and if you have a chance to answer, please do it in a "moron" language so that I understand. Thanks.
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Nov 18, 2004 11:42 pm Post subject:
Most of the time this is hardware related. Sometimes though, it can be software related.
First thing I would do is check my install. If I soldered, I would check for gaps, bridges, or splash. Your D0 is good, otherwise you wouldn't be getting the frag condition (Frequent Red And Green light)
If it is a solderless install, check the alignment of the adapter.
realmccloy
----------------------------
http://www.xbox-hq.com http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum