Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Sat May 21, 2011 5:27 am Post subject: XBOX 1.5 + Xecuter 3 CE
So, i just installed my Xecuter 3 CE in my XBOX 1.5 i have had sitting around for a while now.
I believe my install was correct as I boot the XBOX and i hear the normal boot up sound and no Frag indicator on the Eject LED, but i get NO video what so ever.
Trouble Shooting:
2 different A/V Cables
2 Different TV's (Standard CRT and Newer LCD)
Any idea what would cause this exactly, and if its a damaged connector, does anyone know a some what easy work around i could use, like maybe RCA straight to RCA?
Joined: Sep 13, 2010 Posts: 2644 Location: Kamloops BC Canada
Posted: Sat May 21, 2011 1:38 pm Post subject:
Sometimes the connection gets worn down over time on the XBOX and 360 and when you put the cord in all the way it wont make a proper connection Try pushing it in half way, turn on the XBOX then try slowly pushing it in further and see if it makes a connection.
If that doesnt work, take out the MOBO and check the solder points on the AV package to the board, if it feels loose in any way tighten the 2 screws and as a last resort re tack all the solder points.
If that doesnt work than it means 1 or all of these things: Dead AV package, Dead MOBO, Dead GPU, When soldering you made a connection between 2 points that shouldnt be connected
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Sat May 21, 2011 7:50 pm Post subject:
Well i know it wasnt a solder mess up lol, ive been doing that for ages and know what im doing there.
I tried the cord out halfway and slowly pushed it in but all i get is still sound. Check connections for the piece and they all seem fine...this is my first time having this issue, and it has been sitting around for quit some time so its probably a bad graphics chip... _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
Prehistoricman Moderator
Xbox Version: 1.6 crystal Modded: Xecuter 3
Joined: Oct 09, 2011 Posts: 406
Posted: Tue Oct 11, 2011 9:46 pm Post subject:
I know you made this thread ages ago but you could try using a multimeter to check if there is a connection between the video and any point on the mobo. If there is none, solder a video jack to the video points (I have no idea which ones). If you can't find the right points, there is a coaxial output tut on XBOX-scene. Go to tutorials and then to original xbox. You will find it in the hardware category.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum