stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Tue Apr 15, 2008 12:31 pm Post subject: My problem in the Middle East!
hello, some may know me from a long time ago some might not... i recently got sent over to Bahrain in the middle east ill be here for a yr... so here my problem. i packed my xbox in my laptop case inside my luggage and carried on my laptop for the 20 some on hrs of travel time over here last wk. now that i have somewhere to unpack my stuff i got out my xbox looked at it and saw that all the wires in the front of the xecuter3CE controller had been ripped out, in the move! so I was wondering if anyone had the part with the dipswitchs themselves and the actuall wiring too! also i would pay to have the correct torx driver shipped too, since i don't have any tools either! thanks A bunch Sliker
P.S. also if no one has the parts, do you know where i can just get the peices to repair it... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Wed Apr 16, 2008 2:30 am Post subject:
I'm just wondering why you would want to move to the middle east in times like this? _________________
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Wed Apr 16, 2008 2:57 pm Post subject:
Since these two want to waste your time chatting you up you can try hitting up Scarface and see if he has the parts you need, and no man not the SF ak47 here the one that goes by just plain scarface.
Real good and trustworthy guy, if he tells you he will do something it gets done.
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Wed Apr 16, 2008 6:10 pm Post subject:
i didnt move there, im in the US military, stationed here for about 1- 1/2 yrs... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
SiK_WiD_iT Moderator
Joined: Jan 25, 2007 Posts: 1626 Location: Big Stone Gap, VA USA
Posted: Thu Apr 17, 2008 12:15 am Post subject:
stud_man50 wrote:
i didnt move there, im in the US military, stationed here for about 1- 1/2 yrs...
what exactly do u need? just the torx driver? or do u need wiring for the chip too cause i could send ya the torx man if they will let me send it to ya. as for the wiring i agree with wes, scarface could get what u need. it would be my pleasure to help anyone in the military, especially with an XBOX haha send our regards here at the HQ to all of you guys over there. _________________
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Thu Apr 17, 2008 4:33 am Post subject:
stud_man50 wrote:
i didnt move there, im in the US military, stationed here for about 1- 1/2 yrs...
Ah that would make sense. I'm done with this topic now. _________________
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Thu Apr 17, 2008 11:58 am Post subject:
Scarface has been talkin to me, and the xecuter3ce will work without the dipswitch panel, it defaults to the 1mb... so now i just have to worry about the 220volts.. _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu Apr 17, 2008 2:14 pm Post subject:
We had this topic come up in the past and they make a chip that lets you use a PC power supply with your xbox, but i don't know if that would be any easier then getting s pal xbox power supply.
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Thu Apr 17, 2008 6:06 pm Post subject:
ya.. i bought one of those chips, when i put my xbox in a pc case, but instead of doin all that stuff i just made a special spot for the xbox psu. i should just buy a pal one because with all the moving around etc. it would be best to have it all contained(SP) and not have to worry about that stuff.. _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,809 | 
Guests: 1354 | 
Members: 1 
Forums 
