Posted: Sat Apr 07, 2007 7:43 am Post subject: Matrix Chip Disabling Itself?
I've been having an issue with my solder-less Matrix chip in that it seems to keep disabling itself every so often, requiring me to open up the box and realign it again. For some reason the LED on the chip stays green even when it appears to be disabled or unaligned (ie. the MS dash boots up). Is this a known issue? Is it just the chip falling out of alignment without the LED reflecting that? Is there any way around this?
Maybe I can somehow softmod it while the chip is working (via FTP?) and then remove the chip?
Thanks for your help.
BTW, yes, the chip is set to 'always on' mode.
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Mon Apr 09, 2007 5:03 am Post subject:
i've never used a Matrix, but i would say since the led's are still lit, its your d0 point.. thats what enables the chip and tells the xbox to look there for the dashboard. not to sure on your adapter, but i would loosen the main screw make sure you have it snug to the board and then snug the screw down good. also make sure your D0 is secure... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
changedman Xbox-HQ Newbie
Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Apr 07, 2007 Posts: 2
Posted: Tue Apr 10, 2007 3:09 am Post subject:
Thanks for the reply. I ended up installing a softmod so the chip is redundant now. Everythings working perfectly!
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum