Posted: Fri Mar 02, 2007 4:45 am Post subject: HOW TO REFLASH HYPER X ??????
Ok iv been on the net for hours now and there is nothing on how to reflash the hyperx chip i need to get the hyper X bios utility to show up and i have no idea how to do it my box works fine i just wanna change bios HOW????????????
i swithed the chip on off on and nothing no hyperx bios utility shows up like it did when i first installed the chip
iv burnt a bios bin cd with other stuff on it nothing wasted 12 dvds 2
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
hipsinking Xbox-HQ Newbie
Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Mar 01, 2006 Posts: 3
Posted: Fri Mar 02, 2007 5:28 am Post subject:
That tells how to do it but doent tell me how to get to the hyperx bios upload screen thats all i need is there no way to reflash this chip once it is flashed ?????????????????????
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Fri Mar 02, 2007 5:39 pm Post subject:
its probably something like on an X3 where you hold down the white button on boot-up? try that then black, then right trigger, then left trigger, both triggers... one might work, LOL i've never used hyperX _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
neon_pc Xbox-HQ Newbie
Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Mar 02, 2007 Posts: 2
Posted: Fri Mar 02, 2007 7:02 pm Post subject:
Hi, I recently buy an hyper X chip, and I flash this with XECUTER 2 bios.
Now the XBOX only boot with a message "XECUTER 2 CONFIG LIVE LOADING....."
Anyone can say me what I do?
I am lost.
Thanks
PS: sorry for my bad english but I Spanish
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Sat Mar 03, 2007 2:45 am Post subject:
Now you have to get a copy of AID3.10 and install a Dashboard for it to boot upto... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
robzzombie Moderator
Joined: Jul 15, 2006 Posts: 521 Location: Lockport, Illinois, USA
Posted: Sat Mar 03, 2007 4:42 am Post subject:
Sorry stud your kinda wrong in a few of your posts and i think thats hypnos tut on how to flash the bios and its kinda confusing so im gonna clean up the tut on how to flash it.
---------
Step 1 |
---------
Learn how to share your internet connection with your xbox. Refer to:
http://www.xbox-hq.com/html/xbox-tutorials-206.html on just how to network if you don't already know.
---------
Step 2 |
---------
Boot Xbox with The hyper X enabled and in the Flashbios screen select Etherboot or whatever they say it is. (Not boot from Disc or w.e.)
---------
Step 3 |
---------
Wait till the Xbox gives you an IP address then open Internet Explorer or Firefox and go to the ip address with http:// infront of it and you will see a screen that has a bar a browse button and some small graphics.
---------
Step 4 |
---------
Select browse in the webpage it gave you and open up the BIOS.BIN file that you wish to flash the bios to then hit the Flash button.
---------
Step 5 |
---------
DONT TURN OFF YOUR XBOX IT WILL TURN ITSELF OFF,
---------
Step 6 |
---------
Download AID 3.10 and burn to disc on your computer and then put it in your xbox and it will then read the disc and allow you to put in your favorite hacked dash (May I suggest Unleash X)
---------
Step 7 |
---------
Sit back and enjoy your modded xbox. _________________
tech515 Xbox-HQ User
Xbox Version: Xbox V1.6 Modded: Hyper-X POS
Joined: Jan 22, 2007 Posts: 15 Location: USA
Posted: Sat Mar 03, 2007 5:15 am Post subject:
Well, he said before the hyper-x flash bios screen isn't loading, so this won't work man. He needs to get ozxflash bios app and boot with it, then pop in his disc with the new bios.
robzzombie wrote:
Sorry stud your kinda wrong in a few of your posts and i think thats hypnos tut on how to flash the bios and its kinda confusing so im gonna clean up the tut on how to flash it.
---------
Step 1 |
---------
Learn how to share your internet connection with your xbox. Refer to:
http://www.xbox-hq.com/html/xbox-tutorials-206.html on just how to network if you don't already know.
---------
Step 2 |
---------
Boot Xbox with The hyper X enabled and in the Flashbios screen select Etherboot or whatever they say it is. (Not boot from Disc or w.e.)
---------
Step 3 |
---------
Wait till the Xbox gives you an IP address then open Internet Explorer or Firefox and go to the ip address with http:// infront of it and you will see a screen that has a bar a browse button and some small graphics.
---------
Step 4 |
---------
Select browse in the webpage it gave you and open up the BIOS.BIN file that you wish to flash the bios to then hit the Flash button.
---------
Step 5 |
---------
DONT TURN OFF YOUR XBOX IT WILL TURN ITSELF OFF,
---------
Step 6 |
---------
Download AID 3.10 and burn to disc on your computer and then put it in your xbox and it will then read the disc and allow you to put in your favorite hacked dash (May I suggest Unleash X)
---------
Step 7 |
---------
Sit back and enjoy your modded xbox.
robzzombie Moderator
Joined: Jul 15, 2006 Posts: 521 Location: Lockport, Illinois, USA
Posted: Sat Mar 03, 2007 5:34 am Post subject:
if you are still going off of the pogo pins make sure you hold down the chip in the motherboard make sure your are properly grounded and wearing rubber gloves cuz you could get shocked. It should load up and if it does do the method i said above, _________________
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Sat Mar 03, 2007 6:01 am Post subject:
he already stated that he has a bios on there and wants to upgrade that bios, therefore he can't get back to the flashbios screen. _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
robzzombie Moderator
Joined: Jul 15, 2006 Posts: 521 Location: Lockport, Illinois, USA
Posted: Sat Mar 03, 2007 6:27 am Post subject:
Ahhh ok well to get into a screen with a flashbios on it you will need aid 3.10 then what you do is do an update on it (bios update) burn the updated iso file then put it in ur xbox and go into advanced options or tools someting like that and look for bios flasher or something along that lines. then update the bios with one of those. but again if you are working with the pogo pins hold it down into the motherboard or it could cause some nasty damage to the chip _________________
iblayzit Xbox-HQ Elite Member
Xbox Version: 1.1 Modded: xecutre 2.6
Joined: Oct 10, 2006 Posts: 218 Location: kANSAS cITY
Posted: Sat Mar 03, 2007 12:44 pm Post subject:
OK, the hyperx has a small switch on it that will switch the chip to the hidden spare bios bank. Leave you xbox apart if you want the fix the bad bank. From there you can Flash a fresh bios.
To repair the bad flash:
-load the good bios on the spare bank, you now have no rescue bank
-copy the needed bios into the evox bios folder, this varies depending on if
evo x is installed as a dash or an app, search the tuts if you are unsure
of where to put this file
-now load evox
-flip the switch back to the bad bank, careful not to dislodge your chip
in the process
-now chose system, then flash bois, select the good bios and flash
ALL IS NOW FIXED, leave the sswitch wherever you want it.
NOW IF YOU HAVE ALREADY FLASHED BOTH BANKS WITH A BAD BIOS!!!!
You will need to remove the chip and softmod your machine. Once softmodded you will load evox. The you till need to hotswap your chip. This is not a good idea and there is a good chance to fry both the chip and the machine, but I have never had one hitch personally. Once the chip is installed, flash the good bios. All should be well, good luck with all of this!
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Sat Mar 03, 2007 1:06 pm Post subject:
lol happy someone posted my tutorial, i was the 1st on this site to actually buy and ask about the HyperX, its pos really.
Now i have an X3, which is screwed up cause the last mobo i had messed up and i tried flashing bios and it wouldnt let me it would get about 1/4 done then freeze, so if this hotswapping can mayb fix it, tell me how its done!!! please.....lol _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
iblayzit Xbox-HQ Elite Member
Xbox Version: 1.1 Modded: xecutre 2.6
Joined: Oct 10, 2006 Posts: 218 Location: kANSAS cITY
Posted: Sun Mar 04, 2007 2:44 am Post subject:
The x3 you are using has an external switch bank? If so have you tried booting without the switch plugged in? Are you flashing network or from disk?
Last edited by iblayzit on Mon Mar 05, 2007 5:14 pm; edited 1 time in total
neon_pc Xbox-HQ Newbie
Xbox Version: 1.1 Modded: xecutre 2.6
Joined: Mar 02, 2007 Posts: 2
Posted: Sun Mar 04, 2007 10:22 pm Post subject:
It's necesary have AID3.10 version?
I have an AID3.0 version, but doen't run in my XBOX with the Hyper X installed
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum