Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Thu Jan 18, 2007 11:54 pm Post subject: AID 3.10 loading ?
ok got my bios installed, and I am using xenium OS v2.3.1. Does AID 3.10 (if the disc can be read) Auto load or do I have to selct something off the menu to get it load ? I have gone over the spice guide and the 3.10 manual and cant find anything that tells me. And I dont want to do anything till I know for sure. Thanks
bdta_2000 Xbox-HQ Experienced
Xbox Version: 1.0 Modded: Xenium Gold SP
Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Fri Jan 19, 2007 1:03 am Post subject:
I got it, had to selsct new bios.
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Fri Jan 19, 2007 2:00 am Post subject:
you're getting it now. Keep us posted on how it ends up. _________________
bdta_2000 Xbox-HQ Experienced
Xbox Version: 1.0 Modded: Xenium Gold SP
Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Fri Jan 19, 2007 3:38 am Post subject:
well got my xbmc to where I can look and play around a bit but if I cold boot w/out the disc goes right back to my xenium screen thenif I select my new bios instead of the retail it get error screen, In short how do I get xbmc to load on start up ? but so far xbmc is way cool, love it , I thought it would look like the newer media center on my PC with XP. guess you have to find it. will do more friday.
pezzar V.I.P. Lifetime
Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: May 12, 2005 Posts: 976 Location: Seaside, England
Posted: Fri Jan 19, 2007 9:37 am Post subject:
where have you put the x2config.ini file for the executer bios you are using?
change ur dash boot paths inside this file
bdta_2000 Xbox-HQ Experienced
Xbox Version: 1.0 Modded: Xenium Gold SP
Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Sat Jan 20, 2007 1:05 am Post subject:
How is there a tut ? all I did was fttp flashed the bios , than ran aid 3.10, 1 one-click install to install dash, cant find out how to open any of these files, do i do it thru aid screen or xbmc dash ?
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Sat Jan 20, 2007 4:16 pm Post subject:
Ok slow down there buddy. first thing first. If you only installed the dash, thats all you're going to see. You need to install all your apps so that you can access them. Then you can fully use the xbox _________________
pezzar V.I.P. Lifetime
Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: May 12, 2005 Posts: 976 Location: Seaside, England
Posted: Sat Jan 20, 2007 5:47 pm Post subject:
there is a file called x2config.ini that comes with the bios image. this needs to be configured then loaded to the root of the xbox E drive. Without this the bios will only boot the std M$ dash
bdta_2000 Xbox-HQ Experienced
Xbox Version: 1.0 Modded: Xenium Gold SP
Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Sat Jan 20, 2007 9:11 pm Post subject:
I did install a few apps on E: but not them all, Pezzar where can I look for files? I seen sme files thru xbmc but I dont think you can touch em
pezzar V.I.P. Lifetime
Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: May 12, 2005 Posts: 976 Location: Seaside, England
Posted: Sat Jan 20, 2007 9:52 pm Post subject:
the config file should com with the bios. edit it using X2OOL or Notepad then when finished copy it to the xbox
bdta_2000 Xbox-HQ Experienced
Xbox Version: 1.0 Modded: Xenium Gold SP
Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Sun Jan 21, 2007 2:42 am Post subject:
Ok now Im completly lost, is one of your tuts on this pezzar ?
bdta_2000 Xbox-HQ Experienced
Xbox Version: 1.0 Modded: Xenium Gold SP
Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Sun Jan 21, 2007 1:46 pm Post subject:
hey can I just reformat whole harddrivewith xenium OS and start from scratch. had soeeone over who told me they could fix my problem. dont know everything he did, but it still does same thing, He suggested to reformat and stsrt over cuz there is to much on the drive now. wont do it until I get one of your blessings. (between Us) I dont think he knew what he was doing. LOL
pezzar V.I.P. Lifetime
Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: May 12, 2005 Posts: 976 Location: Seaside, England
Joined: Dec 29, 2006 Posts: 154 Location: Clawson MI
Posted: Mon Jan 22, 2007 10:58 pm Post subject:
i am really not sure what paths I should use, these are preset, are they ok to use ? (In photo below) I will be using xbmc for my dash. also now if I am right I re-flash my chip with this new BIN file, now how do I launch it for the bios file and put the “x2config.ini” file on the root of Xbox E drive?
Sorry photo sucks : this is what it is (in order)
C avalaunch.xbe
C xbmc.xbc
C unleashx.xbc
C xbmc.xbc
C xboxdash.xbc
DSC00653.JPG
Description:
Filesize:
951.14 KB
Viewed:
101 Time(s)
pezzar V.I.P. Lifetime
Xbox Version: V1.6 Modded: Xenium Gold OS v2.3.1
Joined: May 12, 2005 Posts: 976 Location: Seaside, England
Posted: Tue Jan 23, 2007 1:24 pm Post subject:
bdta_2000 wrote:
i am really not sure what paths I should use,
if you put ur XBMC files on F:\APPS\XBMC then
C xbmc.xbe
is not going to be valid is it. If you install unleashx dash to C drive then that file will be ok.
bdta_2000 wrote:
also now if I am right I re-flash my chip with this new BIN file, now how do I launch it for the bios file
you launch the bios through the Xenium launch menu
bdta_2000 wrote:
and put the “x2config.ini” file on the root of Xbox E drive?
use FTP or run AID and use the built in file manager to copy the file from a disc,etc (burn a disc that includes the config file, then you can copy it over)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum